Access Control Swing Gate Turnstile Full Automatic Waist High Turnstile

Swing Barrier Turnstile Access Control Swing Gate Turnstile Full Automatic Waist Swing Turnstile

Swing turnstile gates are mainly used for channel entrance and exit management. Usually, only people, people with luggage, and disabled people are allowed to pass through. Considering that swing turnstile gates can achieve wider channel characteristics than swing turnstile gates, most swing turnstile gate channels can be mixed with pedestrians, bicycles, power-assisted bicycles, disabled vehicles and other non-motorized vehicles

(1) Fault self-check and alarm prompt function, convenient for user maintenance and use;

(2) The operating status of the device can be programmed through the built-in small keypad on the main control panel;

(3) Mechanical structure and induction dual anti-pinch function. When encountering resistance during the swing arm reset process, it will automatically stop or the motor will stop working within the default time. It will reset again after the default delay (until reset), and the force is very small (≤2Kg);

(4) Sound and light alarm function: including illegal intrusion and tailgating alarm;

(5) Anti-collision function, when no gate opening signal is received The swing arm is automatically locked when the signal is on;

(6) The swing arm (arm) is synchronized;

(7) The system automatically resets after the gate is opened. If no one passes through the gate within the specified time, the system will automatically cancel the user's access right. The standard is to automatically reset the gate within 5 seconds after opening;

(8) The channel automatically opens after power failure and automatically closes after power on;

(9) It can be connected to a variety of card readers and receive relay switch signals to work;

(10) It can control the entry and exit of personnel in one direction or two directions;

(11) It can directly realize remote control and management through the management computer;

Bridge swing turnstile gate 1550mm×200mm×960mm

Column swing turnstile gate: diameter 168mm*1000mm

Reading and writing methods: ID card, IC card, magnetic card, barcode reader, etc.Weight: bridge type 60-70Kg, column type 35-40kg

Swing arm length: 300mm-650mm

Maximum swing arm bearing capacity: 30Kg

Working voltage: AV220V±10V, 50Hz

Motor power: 24V 30W

Swing door time: 0.2 seconds

Input interface: +12V level signal or DC12V with pulse width signal ≥100ms, pulse signal driving current ≥10mA

Communication interface: RS485 standard communication distance ≤1200 meters

Passing speed: 40 people/minute (normally open), 25-30 people/minute (normally closed)

Gate opening and closing time: 1-2 seconds

Working environment: indoor, outdoor (shade) Temperature: -10℃—— 50℃

Relative humidity: ≤90%, no condensation

Main structure and configuration: Bridge swing turnstile gate: ◇2 main boxes ◇2 swing doors (swing arms) ◇1 control panel ◇2 mechanical movements and transmission parts ◇1 power supply ◇2 motors Column swing turnstile gate: ◇2 main columns ◇4 auxiliary columns ◇8 auxiliary railings ◇2 swing arms ◇2 control panels ◇4 transformers ◇2 motors ◇2 movements and transmission parts