SUMMIT ANT RHP-E Elevator Load Cell 3000kg 5000kg Lift Compression Load Cell

SUMMIT ANT RHP-E Nominal load 3000kg 5000kg mounted under rope end hitch plate elevator lift compression load cell

Description:
The compression load sensor RHP-E is made of high nickel alloy steel & designed particularly to measure the elevator lift car loading whether the elevator car’s weight is overloaded or not, thereby to ensure the safe operation of the elevator ,and it is typically placed at the position of rope attachment and between the wire rope hitch plates and provide more accuracy measurement.

Features:

1. Load cell especially designed to work a compression.
2. Made of alloy steel of high resistance with anti-corrosion treatment.
3. Particularly installed under the wire rope hitch plate
4. Connected to load control unit OMS series by SUMMIT

Compression load cell RHP-E Size:

Installation and wiring diagram:

                                               Installation postion: under the wire rope hitch plate

For traction elevator lifts, We SUMMIT provide a wide range of elevator load weighing device and strain load cells and it can suit different installation position requests, and usually there are 4 ways to mount it:

Broad selections, We offer you flexible, modular solutions for both requirements, and wide experience with modernization projects.
1.Under elevator cabin (cab load cells UC-AP, UC-H)
2.Clamped on the wire rope (wire rope load cells RH-SM,RH-A100)
3.Between the wire rope hitch plate such as RHP-E, RHP-F, RHP-G and so on. the customized load cells are available on requests(rope hitch compression load cells)
4.Mounted on the elevator car frame to detect the beam deformation (tension link load cell, cross head load cell RHP-X)