Best Price Wood Lab Work Table Furniture Equipment Chemical
Laboratory Furniture with Fhenolic / Epoxy Resin
1. Description
Worktop
(Optional) | 1. 18mm thickness Wilsonart Phenolic Resin with acid and alkali
resistant and anti-corrosion
2. 16mm or 20mm thickness Jiaji epoxy resin board with acid and
alkali resistant, anti-corrosion, heat-resistant | | Sink | 1. pp sink with acid and alkali resistant,
2. pp drain head with pp filter gasket, pp filter strainer, water
cover are supplied | | Faucet | 1. Water tap with 3 outlets, whose body is made of brass with the
treatment
of acid and alkali resistant, rust protection
2. Maximum Water pressure:147P.S.I
3. Gooseneck spout: 360°swing
4. the other 2 spout can be dismantled easily for block, which can
be removed by new spout available for high water pressure | | Socket | Multifunctional power socket with safe protective door in the jack,
which can be used in any instrument. |
2. Cabinet Body Material For Option Cabinet Body
(PP) | 1. 8mm thickness pp board with acid and alkali resistant
2. Drawers material same as cabinet body, 3 guide rails and
inhibiting device are installed in both sides.
3. pp with acid and alkali resistant for handles and hinges | Cabinet Body
(steel) | 1. 1.0 or 1.2mm thickness first grade baosteel cold-roll steel
sheets with phosphoric acid pickling, surface coating epoxy
resin powder with Electrostatic spraying for anti-corrosion
treatment
2. Drawers material same as cabinet body, 3 guide rails and
inhibiting device are installed in both sides.
3. Stainless Steel Hinges
4. Steel Long type handle or stainless steel C type handle or
aluminium alloy C handle | Cabinet Body+Main Frame
(Steel Wooden) | Steel Structure:
1. The bench is supported by cold-roll steel sheets(baosteel, an
gang) and 1.5mm thickness with 40*60 rectangular steel tube
2. The whole lab work bench can be beared for the bulk with
300kg/square meter
3. All the steel materials are prevented from corrosion of metals
by the use of phosphoric acid pickling,
4. Work bench can be installed with adjusting gaskets at the end of
feet which can be adjusted more than 30mm height if the need is
offered.
Cabinet Details:
1. 18mm thickness melamine board whose edge is covered with 2mm
thickness PVC with the treament of melting,sealing for waterproof
2. Melamine board with the treatment of edge banding
3. Each side of the wall is tightly combined by screw
4. The screw of handle is perfectly inserted into the wall of
drawers to be of best quality
5. 3 guide rails and inhibiting device are installed in both sides.
6. Stainless Steel Hinges
7. Steel Long type handle or stainless steel C type handle or
aluminium alloy C handle | Cabinet Body
(wooden) | 1. 18mm thickness melamine board whose edge is covered with 2mm
thickness PVC with the treament of melting,sealing for waterproof
2. Melamine board with the treatment of edge banding
3. Each side of the wall is tightly combined by screw
4. The screw of handle is perfectly inserted into the wall of
drawers to be of best quality
5. 3 guide rails and inhibiting device are installed in both sides.
6. Stainless Steel Hinges
7. Steel Long type handle or stainless steel C type handle or
aluminium alloy C handle |
3. Reagent Rack For Reference.
Reagent rack
(Steel and Glass) | 1. 40*100*1.2mm high quality cold-roll steel tube with phosphoric
acid pickling, surface coating epoxy resin powder with
Electrostatic spraying for anti-corrosion, rust protection, acid
and alkali resistant.
2. Adjustable holes with 2mm in diameter are set for 10mm interval
in the column
3. 10mm thickness tempered glass is used as the reagent shelf layer
whose edge is embeded with 32*16mm aluminium alloy sheet in order
for the reagents to fall off. | Reagent rack
(Wooden) | 18mm thickness melamine board whose edge is covered with 2mm
thickness PVC with the treament of melting, banding for waterproof |
|
