6"–12" Split Frame Pipe Cutting Machine with Heavy Duty Construction and Versatile Tooling for Precision Cold Cutting

The OD-325 split frame pipe cutting machine handles pipelines from 200 mm to 325 mm in diameter. Designed with heavy-duty clamshell construction, it maintains stability under demanding onsite conditions. The machine adopts cold cutting technology, preventing sparks and heat effects while delivering precise weld-end preparation. It is widely used in nuclear plants, oil refineries, ship repair yards, and chemical processing projects. The OD-325 supports multiple beveling angles including V, J, and compound preparations, offering flexibility for different welding requirements. With its strong frame, versatile tooling, and easy installation, this model is an essential solution for both pipeline construction and critical maintenance applications.

OD325 Split Frame Pipe Cutting Machine uses non-thermal cold cutting, ensuring smooth weld-prep surfaces without heat distortion. It is widely applied in energy plants, offshore platforms, and chemical facilities.

The split frame structure allows easy installation on in-service pipelines. All components are secured to the frame halves, preventing loss during operation and ensuring safe, reliable performance.

The steel body version is built for strength and long life in heavy-wall alloy pipe cutting. The aluminum option reduces operator fatigue in high-altitude, confined-space, or mobile maintenance projects.

OD325 is designed for multiple accessories and supports pneumatic, hydraulic, or electric drives. With beveling, facing, and boring capabilities, it delivers full flexibility for industrial pipeline applications.

Electric Motor, Pneumatic Motor and Hydraulic Motor

Metabo Electric Motor
Model: W24-230MVT
Motor Power: 2.4 Kw (3.22 Hp) / 10 A
Power Supply: 220-240 V, 50/60 Hz
Made in Germany
Suitable for more than 80% of applications. Requires 220V-50Hz power supply and is convenient for on-site use.

Pneumatic Motor
Motor Power: 2.76 Kw (3.75 Hp)
Air Consumption: 2.8 m³/min @ 0.6 Mpa
Suitable for sites with explosion-proof requirements. However, performance may be affected if the air supply is far from the site or if air pressure is low.

Hydraulic Motor
BMR-100 (ODH168-ODH457)
BMR-125 (ODH508-ODH830)
BMR-160 (ODH914-ODH1230)

Hydraulic Power Unit
Model: HPU-10E
Motor power: 7.5 Kw (10 Hp)
Power supply: 3 Ph, 380-440 V+N, 50/60 Hz
Max flow: 32 L/min
Pressure: 12.5 Mpa
Recommended for model OD830 and above to ensure greater power. Please note, however, that hydraulic stations are costly and inconvenient to transport.

(Cutting Tool Slide and Beveling Tool Slide)
Standard Tool Slide for model OD168-OD762.
With standard 12×20mm beveling tool bits, achieve cut / bevel upto 30 mm wall thickness in one pass.
Max. Travel: 75 mm.
3" Cutting Tool Slide, Part No. ODSCT-3001A
3" Beveling Tool Slide, Part No. ODSBT-3002A

(Cutting Tool Slide and Beveling Tool Slide)
Standard Tool Slide for model OD830-OD1230.
With standard 12×20mm beveling tool bits, achieve cut / bevel upto 30 mm wall thickness in one pass.
Max. Travel: 100 mm.
4" Cutting Tool Slide, Part No. ODSCT-3003A
4" Beveling Tool Slide, Part No. ODSBT-3004A

Heavy Wall Tool Slide for model OD168-OD762.
Install 25 mm width tool bits that can cut / bevel tubes of any wall thickness.
Max. Travel: 75 mm.
3" Heavy Wall Cutting Tool Slide (Heavy Wall Beveling Tool Slide), Part No. ODHT-3005A

Heavy Wall Tool Slide for model OD830-OD1230.
Install 25 mm width tool bits that can cut / bevel tubes of any wall thickness.
Max. Travel: 100 mm.
4" Heavy Wall Cutting Tool Slide (Heavy Wall Beveling Tool Slide), Part No. ODHT-3006A

O.D. Tracking Slide- can be solution for all misshapen tubes and pipes. Tracking Tool Slides feature durable spring and tracking module that follows the contours of a deformed or less than perfectly round pipe. Install 25×25 mm tool bits.
Max. Travel: 55 mm.
Tracking Tool Slide, Part No. ODST-3007A

Designed for the precision counterboring of tube and pipe inside diameter. The Counterboring Tool Slide can be attached directly to the standard tool slide on all OD machines. Install 08×30 mm tool bits.
Max. Travel: 70 mm.
Counterboring Tool Slide, Part No. ODCBT-3008A
Swivel Counterboring Tool Slide, Part No. ODCBT-3009A

A portable beveling machine can be equipped with different tool slides and tool bits to process V-grooves, J-grooves, and compound grooves, as well as perform internal beveling and boring operations.

The OD325 is a high-performance machine for pipes ranging from 159mm to 325mm, serving sectors like natural gas transmission, thermal power generation, and marine engineering. Its non-thermal cutting action ensures clean, oxidation-free bevels ready for welding, critical for high-pressure and high-temperature applications. In LNG facilities, the OD325 prepares cryogenic pipework, ensuring fracture-resistant welds. The clamshell design allows easy mounting around active pipelines, minimizing downtime during repairs or modifications. It is also widely used in hydroelectric projects for large penstocks and water conduits, as well as in district heating systems for robust and reliable joint preparation. The machine supports various tooling options for beveling, facing, and boring, adapting to complex onsite requirements.

All products are backed by a 12-month warranty from the date of shipment. During this period, any manufacturing defects will be addressed promptly to ensure reliable performance and customer satisfaction.

We maintain a comprehensive inventory of spare parts to minimize downtime. All spare parts orders are processed and dispatched within 2 business days, ensuring quick delivery and continuous operation of your equipment.

Each machine is supplied with a detailed instruction manual and step-by-step operation videos. For additional support, our technical team provides real-time video guidance and remote troubleshooting, ensuring that your equipment is operated safely and efficiently.