Fully Auto Positive And Negative Thermoforming Machine Automatic Locking 20-30mold/Min

HX 6175 Intelligent Temperayure Control System Pressure Thermoforming Machine Automatic Locking Mold

Machine Introduction:

The HX-6175 fully automatic positive and negative pressure three-station hot forming machine is an advanced hot forming equipment that focuses on "multi-scene adaptation, high-precision processing, and high-efficiency production". It solves the pain points of "single category, insufficient precision, and high energy consumption" for plastic processing enterprises with flexible material compatibility, precise parameter control, and strong processing performance, fully meeting the production needs of high-quality control and high production capacity.
 
Key Features:

1. Loading area

A high-power motor is used for feeding. The maximum coil diameter is 700mm, and 300-500 KG can be

loaded/loaded. The sheet to be fed is driven by a rubber roller. Two seamless steel pipe rods are provided

to replace the sheet. A silicon oil spraying device is added in the sheet feeding area to facilitate demoulding

2. Heating area

(1) The electric furnace adopts a specific electric furnace design. Heat insulation aluminum foil is added       on the back of the heating brick, and heat insulation cotton is added on the back of the electric furnace         to ensure that the electric furnace is not deformed at ultra-high temperatures, and the heating wire is           more durable.

(2) The heating brick is made of Swedish Cornell heating wire. The heating brick is built with thermal insulation cotton. The brick has a good thermal insulation effect and is durable. It is guaranteed to last for an extra long time, for 5 years. The high temperature wire is 2.5 mm² (standard is 1.5 mm²). Ensure that the wires are durable and do not easy to age.

(3) Temperature control module: the latest temperature regulation module is adopted, which is precise and easy to regulate.

(4) Electric furnace dislocation adjustment function, a row of heating bricks can be closed when the baking sheet width is less than 620mm, saving energy.

(5) PET function of electric furnace: heat PET sheets for a short time to make PET products easier to shape and more transparent.

3. Forming area

(1) The molding length is 610mm, the width is 710mm, and the three sections are heated in the upper and lower furnaces; The maximum forming height is 100mm.

(2) Both the upper and lower molds adopt a 4.5 kW servo motor, and both the upper and lower molds can be controlled by a two-section speed.

(3) The forming mould is designed with a water delivery valve, and the mould can only be watered in an automatic state.

(4) Side mold loading, automatic mold locking, reduce mold changing time, and improve production efficiency.

4. Trimming area

(1) Cutting size 610 × 710mm, the cutting upper die is equipped with a heating knife system.

(2) The cutting depth can be adjusted more accurately without hurting the knife, and can also be manually adjusted.

(3) High high-power 5.5KW servo is used up and down to ensure powerful cutting, and all kinds of products can be easily cut.

(4) Both the upper and lower die movements adopt a two-section speed design, which is easier to adjust.

(5) Side mold loading, automatic mold locking, reduce mold changing time, and improve production efficiency.
 
Machine parameters: