X Ray Counter Providing Automatic Navigation Window and Table Microfocus X-Ray Inspection System X6800 Key Advantages - Closed type X-ray tube with over 10,000 hours lifetime,
maintenance-free
- New generation 5" HD digital flat panel detector (FPD)
- FPD can tilt 60° without sacrificing magnification
- Automatic navigation window - table moves to clicked position
- 530×530mm table with 10KG load capacity
- Speed adjustable 5 axis linkage system
- Editable inspection procedures for automated batch inspection
- Easy operation with only 2 hours training required
Hardware Parameters | Component | Parameter | Specification |
|---|
| X-ray source | Type | Closed, microfocus | | Max tube voltage | 90kV | | Max tube current | 200μA | | Focal spot size | 5μm | | Function | Auto preheat | | Flat panel detector | Effective area | 130mm×130mm | | Pixel size | 85μm | | Resolution | 1536×1536 | | Frame rate | 20fps | | Tiltable angle | 60° | | Table | Size | 530mm×530mm | | Detectable area | 500mm×500mm | | Max load | 10kg | | Equipment | Magnification | Geometry 200X | System 1500X | | Inspection speed | Max 3.0s/point | | Dimensions | 1360mm (L)×1365mm (W)×1730mm(H) | | Weight | 1200kg | | Power supply | AC110-220V 50/60HZ | | Max power | 1500W | | Industrial PC | I5 CPU, 8G RAM, 500GB SSD | | Displayer | 24"HDMI LCD | | Safety | Radiation leakage | No leakage, international standard: ≤1μSv/h | | Lead glass observation window | Transparent lead glass window shields radiation to observe the
inner status | | Window and back door safety interlock | Once users open the window or back door, X-ray tube will power off
immediately. When the window or back door is open, users can't turn
on the X-ray | | Electromagnetic safety switch | Lock once the X-ray is on, users can't open the observation window | | Emergency stop | Next to the operation position, press to power off | | Tube protection | User can't leave the software if you don't close the X-ray tube |
Software Functions | Function Module | Operation | Description |
|---|
| Operation | Keyboard and mouse | Can finish all operations | | X-ray tube control | Mouse click | Click X button to turn on/off X-ray. Real-time tube voltage and
current display. Adjust via buttons, slider, or typing | | Status bar | Visual indicator | Indicates interlock status, pre-heat status, and X-ray status by
flashing alternately red and green | | Image effect adjustment | Adjustable parameters | Brightness, contrast and gain can be adjusted freely for optimal
results | | Product list | Save/recall parameters | Save inspection parameters (Z-axis position, brightness, contrast,
gain) for same product inspection to improve efficiency | | Navigation window | Click to move | Camera takes table photo, click anywhere to move table to selected
position | | Motion axis status | Real-time display | Display real-time coordinates | | Inspection result | Measurement display | Measurement results (voids rate, distance, area, etc.) display in
order | | Speed control | Adjustable settings | Movement speed of each axis adjustable to slow, normal, and fast | | Voids rate measurement | Automatic calculation | Click two points to determine rectangle. Software automatically
finds and measures solder ball edge, pad, internal voids. Provides
voids rate, area, circumference, max voids rate, length, width.
Indicates NG/OK by red/green | | Parameters adjustment | Adjustable settings | Adjust grayscale threshold, pixel, contrast, size filtering for
accurate results | | Add voids manually | Manual input | Draw polygon or free figure to calculate as void into void rate | | Save parameters | Save/recall settings | Save parameters (grayscale threshold, pixel, contrast, size
filtering) for same product detection to improve efficiency | | Other measurement functions | Distance | Click A and B points for baseline, click C point to measure
vertical distance from C to baseline | | Distance rate | Used for through-hole soldering rate measurement. Set point D,
divide vertical distance from D to baseline by vertical distance of
C point for percentage ratio | | Angle | Click A and B points for baseline, click C point to measure angle
between BA and BC rays | | Radius | Used for round components like solder balls. Click three points to
determine circle, measure circumference, area and radius | | Perimeter | Used for square components. Click two points to determine square,
measure length, width and area |
|
