X Ray Counter Featuring Closed Microfocus X Ray Source Suitable

Browse Categories

SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.

City: shenzhen

Country/Region:china

Tel:+86-1840-6666--351

Contact Person:
Mr.Jeff Chan View Contact Details

X Ray Counter Featuring Closed Microfocus X Ray Source Suitable

Brand Name	WELLMAN
Model Number	X8800IL(IL-3000)
Certification	CE, FDA
Place of Origin	CHINA
Minimum Order Quantity	1
Payment Terms	T/T
Weight	2200kg
Power supply	AC110-220V 50/60HZ
Max power	3000W
Industrial PC	I7 CPU, 16G RAM, 240GB SSD + 1T HDD
Displayer	24” HDMI LCD

Detailed Product Description

X Ray Counter Featuring Closed Microfocus X Ray Source Suitable

Product Description

In-line Microfocus X-Ray Inspection System IL-3000

1. Hardware Parameters

X-ray source		Brand	Japan Hamamatsu
Type	Closed, microfocus
Max tube voltage	90KV
Max tube current	200μA
Focal spot size	5μm
Function	Auto preheat
Flat panel detector		Brand	IRay
Effective area	130mm*130mm
Pixel size	85μm
Resolution	1536*1536
Frame rate	20fps
Tiltable angle	60°
Inspection		Transmission	Belt
Motor	servo motor
Detectable area	Length 520mm, width 80-430mm adjustable
Max load	10kg
Equipment		Magnification	Geometry 200X \| System 1500X
Inspection speed	Max 3.0s/point
Dimensions	2600mm (L)1300mm (W)1800mm (H)
Host machine dimensions	1400mm (L)1300mm (W)1800mm(H)
Weight	2200kg
Power supply	AC110-220V 50/60HZ
Max power	3000W
Industrial PC	I7 CPU,16G RAM,240GB SSD+1T HDD
Displayer	24"HDMI LCD
Safety		Radiation leakage	No leakage, international standard:≤1μSv/h
Lead glass observation window	Transparent lead glass window shields radiation to observe the inner status.
Window and back door safety interlock	Once users open the window or back door, X-ray tube will power off immediately. When the window or back door is open, users can't turn on the X-ray.
Electromagnetic safety switch	Lock once the X-ray is on, users can't open the observation window.
Emergency stop	Next to the operation position, press to power off
Tube protection	User can't leave the software to if you don't close the X-ray tube.

2. Software Function

Function module	Operation
X-ray tube control	Using mouse to click the X button can turn on or off the X-ray. The real-time tube voltage and current value will display beside, users can click up and down button, or drag the slider, or type to adjust.
Status bar	Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green.
Image effect adjustment	The brightness, contrast and gain of the image can be adjusted freely to achieve a satisfactory result.
Product list	Users can save the inspection parameters such as Z-axis position, brightness, contrast and gain, and can directly call the parameters when inspecting the same product, to improve the inspection efficiency.
Navigation window	After the camera takes a photo of the table, click anywhere in the photo, the table will move to the place you click and display on the screen.
Motion axis status	Display real-time coordinates.
Inspection result	The measurement results (voids rate, distance, area, etc., set by users) display in order.
Speed control	The movement speed of each axis can be adjusted to slow, normal and fast.
Voids rate measurement
Automatic calculation	Click on two points to determine a rectangle. The software automatically finds and measures the edge of the solder ball in the rectangle, the pad and the internal voids, and can get the data of the voids rate, the area of the solder ball, the circumference, the biggest void's rate, the length and the width, and indicates NG or OK by red and green.
Parameters adjustment	Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters to get accurate results of automatic calculation.
Add voids manually	Users can draw a polygon or a free figure and calculate it as a void into the void rate.
Save parameters	Users can save parameters such as grayscale threshold, pixel, contrast, size filtering and other parameters, and can directly call the parameters when detecting the same product, to improve the detection efficiency.
Other measurement function
Distance	Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline.
Distance rate	It is mostly used to measure the soldering rate of the through-hole. Set one more point "D" than the distance. Divide the vertical distance from the D point to baseline by the vertical distance of the C point, to obtain the percentage ratio of the vertical distance of D to C.
Angle	Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays.
Radius	It is mostly used to measure round components such as solder balls. Click three points to determine a circle and measure the circumference, area and radius.
Perimeter	It is mostly used to measure square components, click two points to determine a square, measure the length, width and area.
Automatic inspection
Manual setting	Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture.
Array	For the regular inspection points, users only need to set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures.
Automatic identification	For inspection points with obvious features, the software automatically identifies the positions, takes measurements, and saves the image.

3. Our Advantages

Japan Hamamatsu X-ray tube, the best closed type X-ray tube in the world, with more than 10000 hours lifetime, maintenance-free.
New generation IRay 5" HD digital flat panel detector (FPD).
Automatic navigation window, the table will move to where you click.
Belt transmission, width adjustment by lead screw & guide rail, max width 620mm.
6 axis motion system equipped with servo motor, X-ray tube and FPD move in sync.
Can edit inspection procedures to achieve automated inspection in large quantities.
Easy to operate, can quickly find defects, only need 2 hours to train.

4. Working Principle

5. Application Example

Product Tags: closed microfocus X ray counter X ray counter with microfocus source X ray counter for precise detection

Related Products

Automated xray nondestructive testing equipment with fast positioning and clear imaging

Automated In Line X Ray Inspection System 90kV Max Tube Voltage Maintenance Free

In Line X Ray Inspection PCB SMT X Ray Machine 1500X Magnification 620mm Width

Inline Pcb X Ray Inspection Machine With 10000 Hour Maintenance Free Tube

Customizable Automatic X Ray Inspection PCB IL-3000 With 5" HD FPD

SMT PCB Microfocus X Ray Inspection System With 80kV Max Tube

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!