Automated Microfocus X Ray Electronics Inspection System For Time Saving Inspection Process

Browse Categories

SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.

City: shenzhen

Country/Region:china

Tel:+86-1840-6666--351

Contact Person:
Mr.Jeff Chan View Contact Details

Automated Microfocus X Ray Electronics Inspection System For Time Saving Inspection Process

Brand Name	WELLMAN
Model Number	X6000
Certification	CE FDA
Place of Origin	CHINA
Minimum Order Quantity	1
Payment Terms	T/T
Type	Closed, microfocus
Max tube voltage	90kV
Max tube current	200μA
Focal spot size	5μm
Effective area	130mm*130mm

Detailed Product Description

Automated X-Ray Inspection System with New Generation 5 HD Digital Flat Panel Detector

Microfocus X-Ray Inspection System X6000

Working Principle

Hardware Specifications

X-ray Source
Type	Closed, microfocus
Max tube voltage	90kV
Max tube current	200μA
Focal spot size	5μm
Function	Auto preheat
Flat Panel Detector
Effective area	130mm×130mm
Pixel size	85μm
Resolution	1536×1536
Frame rate	20fps
Table Specifications
Size	420mm×420mm
Detectable area	400mm×400mm
Max load	15kg
Equipment Specifications
Magnification	Geometry	150X
	System	1500X
Inspection speed	Max 3.0s/point
Dimensions	1100mm (L)×1000mm (W)×1600mm(H)
Weight	1000kg
Power supply	AC110-220V 50/60HZ
Max power	1300W
Industrial PC	Intel I5 CPU, 8G RAM, 240GB SSD
Displayer	24"HDMI LCD

Key Advantages

Closed type X-ray tube with over 10,000 hours lifetime (maintenance-free)
New generation 5" HD digital flat panel detector (FPD)
Optional 360° rotary jig for multi-angle inspection
Automatic navigation window - table moves to clicked position
420×420mm table with 15KG load capacity
Speed adjustable 3-axis linkage system
Intuitive operation with only 2 hours training required
Programmable inspection procedures for automated batch inspection

Software Capabilities

Function module	Operation	Keyboard and mouse can finish all operations
	X-ray tube control	Using mouse to click the X button can turn on or off the X-ray.The real-time tube voltage and current value will display beside,users can click up and down button,or drag the slider,or type to adjust.
	Status bar	Indicates the interlock status,pre-heat status,andX-ray status by flashing alternately red and green.
	Image effect adjustment	The brightness,contrast and gain of the image can be adjusted freely to achieve a satisfactory result.
	Product list	Users can save the inspection parameters such as Z-axis position,brightness,contrast and gain,and can directly call the parameters when inspecting the same product,to improve the inspection efficiency.
	Navigation window	After the camera takes a photo of the table,click anywhere in the photo,the table will move to the place you click and display on the screen.
	Motion axis status	Display real-time coordinates.
	Inspection result	The measurement results(voids rate,distance, area,etc.,set by users)display in order.
	Speed control	The movement speed of each axis can be adjusted to slow,normal and fast.
Voids rate measurement	Automatic calculation	Click on two points to determine a rectangle.The software automatically finds and measures the edge of the solder ball in the rectangle,the pad and the internal voids,and can get the data of the voids rate,the area of the solder ball,the circumference, the biggest void's rate,the length and the width,and indicates NG or OK by red and green.
	Parameters adjustment	Users can adjust the grayscale threshold,pixel, contrast,size filtering and other parameters to get accurate results of automatic calculation.
	Add voids manually	Users can draw a polygon or a free figure and calculate it as a void into the void rate.
	Save parameters	Users can save parameters such as grayscale threshold,pixel,contrast, size filtering and other parameters,and can directly call the parameters when detecting the same product,to improve the detection efficiency.
Other measurement function	Distance	Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline.
	Distance rate	It is mostly used to measure the soldering rate of the through-hole. Set one more point “D” than the distance. Divide the vertical distance from the D point to baseline by the vertical distance of the C point, to obtain the percentage ratio of the vertical distance of D to C.
	Angle	Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays.
	Perimeter	It is mostly used to measure square components, click two points to determine a square, measure the length, width and area.
	Radius	It is mostly used to measure round components such as solder balls. Click three points to determine a circle and measure the circumference, area and radius.
Automatic inspection	Manual setting	Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture.
	Array	For the regular inspection points, users only need to set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures.
	Automatic identification	For inspection points with obvious features, the software automatically identifies the positions, takes measurements, and saves the image.

Application Examples

Product Tags: Microfocus X Ray Electronics Inspection Automated X Ray Electronics Inspection Time Saving electronic x ray machine

Related Products

XRay Inspection System Maintenance Free X Ray Tube for PCB BGA Testing

XRay Inspection Machine for Electronic Component Inspection

XRay Inspection Machine 5μm Focal Spot for Electronics Production Line

automatic x ray inspection system for electronics defect inspection with oversized table

Microfocus XRay Inspection System for Defect Analysis in SMD LED and PCB Parts

X Ray Inspection Machine High Accuracy Void Detection for Electronic Parts and SMT

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!