The manufacturer instruction documents IMMFP01, IMMFP02 and IMMFP03; the IMMFP03 arrangement uses IMMPI01 or IMMPI02 as specified.
ABB Bailey NTMP01 Multi-Function Processor Termination Unit
|
Detailed Product Description
|
NTMP01 · ABB / Bailey RS-232, RS-485 and station serial links ABB Bailey NTMP01 Multi-Function Processor Termination UnitABB Bailey NTMP01 processor termination unit for documented RS-232, RS-485 and control-station serial connections in Harmony and INFI 90 systems. TypeProcessor communication termination unit SystemHarmony / INFI 90 rack controllers FocusRS-232, RS-485 and station serial links BrandABB / Bailey 01 Overview Product IntroductionNTMP01 provides external serial and control-station termination for ABB Bailey rack-mounted controllers. Manufacturer documentation covers IMMFP01/02/03 applications, with IMMPI01/02 used where specified, and identifies additional interface applications for INIIT02 and INICT03. The assembly supports two isolated RS-232-C channels, with one channel configurable as a non-isolated RS-485 connection, plus a control-station serial link. Port mode, handshaking and station wiring must be set for the connected device. 02 Verified manufacturer data Technical Specifications
03 System fit Compatibility & Connected HardwareThe same instruction also covers NTMP01 termination for INIIT02 and INICT03 through the appropriate IMMPI interface. ABB General Purpose Interface literature lists NTMP01 + NTKU01 among peripheral hardware for documented MFP03, BRC100/200/300/400/410 and related interface arrangements. Use the exact architecture drawing for the installed controller generation. No direct replacement is asserted. Cable, port electrical standard, DCE/DTE mode and station topology must match. 04 Maintenance context Applications & Fault ScenariosSerial device offlineA printer, computer or event recorder no longer communicates and the port mode, cable or isolated interface path must be checked. DCE/DTE mismatchA new peripheral is connected but transmit and receive activity is absent because both ends use an incompatible port role. RS-485 migrationOne channel is being changed from RS-232 to the documented non-isolated RS-485 mode and needs a complete wiring and grounding review. Redundant controller servicePrimary and backup path indication does not follow controller status, prompting checks of cable seating and the paired processor arrangement. 05 Field practice Serial Port Setup & Station IntegrationDefine each port before wiringRecord the peripheral, protocol, RS-232 or RS-485 electrical standard, DCE/DTE role and handshake requirement. Configure jumpers from the correct manufacturer table. Respect isolation boundariesThe two RS-232 channels are isolated; the documented RS-485 option is non-isolated. Review grounding and common-mode conditions before conversion. Check the controller pathInspect the NKTU cable, IMMPI interface where used and primary/redundant connections. Use the two LEDs as path indicators, not as a substitute for end-to-end communication testing. Commission at the application layerAfter physical checks, verify port settings in the controller and peripheral, then prove message transfer or print/event output under normal operating conditions. 06 Source record Official Documentation
07 Order support Amikon ServiceTest scope and unit condition are confirmed before dispatch, with ESD-safe export packing. DOA, returns, warranty and after-sales support follow the quotation. 08 Product-specific answers FAQWhich serial interfaces are available on NTMP01?It supports two isolated RS-232-C channels, with one channel configurable instead as a non-isolated RS-485 interface, plus a control-station serial link. Can NTMP01 be configured as DCE or DTE?Yes. The manufacturer instruction documents DCE, DTE, non-handshake and loopback arrangements. Use the jumper table for the required port and hardware revision. Which controller modules are documented with NTMP01?The instruction covers IMMFP01/02/03, including the specified IMMPI interface arrangements, and also documents INIIT02 and INICT03 applications. What do the two NTMP01 LEDs indicate?They identify active primary and redundant controller paths in the documented arrangement. End-to-end serial communication still needs a functional test. Is the NTMP01 RS-485 interface isolated?No. ABB documentation distinguishes the isolated RS-232 channels from the non-isolated RS-485 option, so grounding must be reviewed. What information helps quote NTMP01 correctly?Provide the controller and interface module, cable part number, required serial standard, board revision, quantity, destination and required date. Request a quotation NTMP01 RFQFor an accurate offer and revision check, send the following five details. Add nameplate photographs and connected-module information when available. Email the RFQ
|
||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: ABB Bailey NTMP01 processor unit multi-function termination unit ABB PLC termination processor |
Related Products
|
ABB CI853K01 3BSE018103R1 Dual RS232-C Interface |
|
ABB DSQC663 3HAC029818-001 Drive Unit with 3-phase AC Supply 600-800V DC Link |
|
ABB DSAI130D 3BSE003127R1 16-bit Resolution Analog Input Board with ±0.05% Accuracy |
|
3BHE041343R0102 PCD530 A102 ABB Communication Control Module with Profibus/Modbus Interfacing |
|
ABB 07DI92 GJR5252400R0101 Distributed Digital I/O Device with 8 Input Channels |
|
ABB SPDSI14 16-Channel Digital Input Module with Hot-Swap Functionality for Harmony Rack I/O |
Email to this supplier