Stainless Steel Automatic Heavy Duty Wire Mesh Weaving Machine
BWR1300D
1.Heavy Duty Metal Wire Mesh Loom Performance Highlights
- Tight tolerance apertures at higher wire diameters
- Up to 120 rpm with clean selvedges(spec-dependent)
- Long-run stability:reduced drift, fewer density corrections
2. Heavy Duty Metal Wire Mesh Loom Operation & Process Notes
- Load wire, align guides → call the validated recipe by mesh spec
- Auto-tension ramp to setpoint → low-speed check → rated speed
- Endless take-up for long rolls / Straight-roll for discrete batches
- Inline length counter simplifies lot documentation
3. Quick FAQ
- Can it weave Dutch? — Yes(project-dependent), governed by recipe limits.
- Changeover time? — Minutes for standard count/wire swaps with stored recipes.
- Maintenance? — Daily checks + periodic PM；optional auto-lubrication reduces routine stops.
5. Heavy Duty Metal Wire Mesh Loom Specifications:
Feature Category | Light-duty Loom (Model B) | Heavy-duty Loom (Model D) |
Mesh Width | 1300mm 1600mm | 1300mm 1600mm |
Harness System | Positive (Overhead) | Negative (Bottom Cam) |
Web Removal Method / Doffing Method | Continuous Web Removal or Direct Winding | Continuous Web Removal or Direct Winding |
Wire Diameter Range | Continuous Web Removal | 0.01 - 0.2 mm | 0.1 - 0.6 mm |
Direct Winding | 0.03 - 0.2 mm | 0.1 - 0.3 mm |
Mesh Count Range | Plain Weave | 30 - 500 mesh/inch | 10 - 100 mesh/inch |
Twill Weave | 30 - 635 mesh/inch | 20 - 100 mesh/inch |
Dutch Weave | 100 - 2300 mesh/inch | 30 - 500 mesh/inch |
Beating-Up Frequency | Max. 120 r/h | Max. 100 r/h |
Motor Power | 2.2kw | 2.2kw |
Standard Configuration | Crankshaft Type | Bushing Type |
Side Frames | Casting Wall Plates |
Tension System | Tension Sensor |
Rapier Head Type | Carbon Fiber |
Drive Type | Fully Digital Control (CNC) |
6. Detailed Images:
