HAA7525 High Hydrolysis Anionic PAM Flocculant for Tailings Management and Mineral Processing

Polyacrylamide is a general term for acrylamide homopolymer orpolymers obtained by copolymerization withother monomers. It is one of the most widelyused varieties of water-soluble polymers. It is ahard glassy solid at room temperature, andbecomes a transparent liquid after dissolutionAfter long-term storage of the liquid, the viscosityof the solution will decrease due to the slowdegradation of the polymer. The main applicationareas are water treatment, papermaking, miningmetallurgy, etc.

Product Advantages

• Economical and achieve good effects at low dosage.
• Significantly improve the sludge production efficiency and reduce the moisture content of sludge cake
• lncrease the settling rate of suspended solids during the solid-liquid separation in sewage treatment process.
• Highly effective in a wide PH range(2-9), it is capable of treating waste water and sludge under weak acidic condition.

Product Forms

Usage Instructions

Preparation:
Dissolve CPAM in clean water to make a 0.1%–0.3% aqueous solution. Stir slowly to avoid clumping.
Application:
Add the prepared solution evenly into the wastewater system.
Dosage:
Typical dosage is 1–10 ppm, depending on wastewater characteristics.
Mixing:
Allow proper mixing and reaction time for optimal floc formation.

 How to use OYIFLOC Anionic Polymer Flocculant?