Plastic Processing Industry Effluent Sludge Dewatering Polymer
Cationic Polyacrylamide OYIPOLYMER C8050 Grade - The wastewater generated by plastic processing plants during the
production process contains a large amount of suspended particles, organic pollutants, inorganic salts and
coloring substances. Direct discharge will cause
- serious environmental pollution. Traditional treatment methods are
often ineffective and costly.
- Aiming at this industry point, we innovatively launched a
synergistic treatment solution of polyaluminium chloride (PAC) and polyacrylamide (PAM), which has been
successfully applied in many plastic processing companies, achieving a double breakthrough in environmental
protection compliance and cost optimization.
- Using polyacrylamide for a quick separation of liquid and mud, get
the mud settling quickly, and get clear water quickly.
Why choose US? - Customized formula: provide anionic/cationic/nonionic PAM and PAC with different
contents
- Global verification: products are used in coal mines in Central Asia, gold mines in
Africa, copper mines in South America and so on
- Water Samples testing → Laboratory test to determine the best ratio
- Free sample → Free 0.1-0.5kg sample
- Long-term technical support → 15 years of stable operation guarantee
- After-sales service quick response → within 12 hours
Technical Specifications | Item | Standard |
|---|
| Appearance | White or yellowish granular | | Charge degree (%) | 50% | | Bulk Density, kg/m³ | 600-800 | | Molecular Weight | 10-12million | | Recommend Dissolution Ratio | 0.1%--0.5% | | PH value at 0.1% solution at 25℃ | 4-9 | | Insoluble (%) | ≤0.3 | | Remaining Monomer (%) | ≤0.17 | | Dissolution Time (min) | ≤60 minutes | | Shelf Life | 24 months |
Primary Results
Instruction of polyacrylamide - Before using,dissolve polyacrylamide with tap water at a ratio of
0.1%-0.5% and stir until fully dissolved.
- Do not use iron materials to stir or hold PAM, because the reaction
performance of PAM will decrease when it encounters iron.
- The dosage needs to be calculated through laboratory pilot tests,
with the aim of achieving the aggregation of flocs and presenting
the phenomenon of sludge-water separation.
- It is better to use up the prepared PAM solution within 24 hours.
- Products should be stored in unopened package in a dry atmosphere
at temperature no higher than 35℃.
Package of polyacrylamide |
