▋Double-barrier parking space gate The dual-arm parking barrier (J-CW201D) consists of four
components: the housing, transmission mechanism, control unit, and
arm. It is primarily used in parking lot solutions for managing new
energy vehicle spaces. By coordinating with license plate
recognition cameras and charging piles, it effectively addresses
issues such as "gas vehicles occupying spaces," "short-term
charging with long-term parking," and "parking without charging,"
significantly reducing the need for manual supervision. ▋Technical Specifications | Product Model | J-CW201D | | Device Name | Double-barrier parking space gate | | power supply voltage | DC24V | | Landing speed | 2-6s adjustable | | Maximum rod length | Including a 2m chassis | | Color Selection | Green | | Protection level | IP54 | | rated power | 60w | | service life | ≥ 3 million times | | Rod material | aluminum alloy | | Operating Temperature | -30°C-75°C | | Chassis thickness | 1.5mm | | spray thickness | 60-120um | | Chassis decoration LED light |
| | Box salt spray test time | 72 hours | | Optional interface | 485, Bluetooth, TTL, TCP/IP, 4G, etc | | Support accessories | Infrared radiation, radar, ground sensing, traffic lights, sound
and light alarms, etc | | anti-smash | Resistance rebound, delayed pole drop, fleet mode, etc | | Remote control distance/encryption | ≥ 50m/Yes (open and unobstructed) | | Accessories List | 2 * remote control, 2 * key, 4 * M10 × 150 screws, 6 * 16 × 150
expansion screws | | Chassis dimensions | 985×300×160mm | | Box packaging size/weight | 210×1035×240mm/28kg |
▋Product Features - This product is mainly linked to license plate recognition cameras
and charging stations, effectively solving problems such as "fuel
truck occupying space", short charging and long stopping, "and"
stopping without charging ".
- Infinite position design allows for manual lifting of the brake
lever during power outages.
- One machine with dual positions, bidirectional control, capable of
managing two parking spaces simultaneously. It must be used in
conjunction with radar to achieve unmanned parking lot management.
▋Product precautions - When the product is running, please confirm that there are no
obstacles blocking the running path;
- When the barrier gate is in operation, it is strictly prohibited to
open the chassis door or cover to avoid accidents;
- At the time of leaving the factory, the internal wiring of this
gate has been prepared, and generally, users are not allowed to
make changes. They only
- need to connect the AC 220V power supply to the input terminal of
the air switch;
- The chassis shell must be grounded and a leakage protection switch
must be installed at the power end;
- When lowering the gate, it is strictly prohibited to place objects
or have people standing or walking below the gate;
- When there is a power outage at the barrier gate, the gate rod
needs to be manually raised through the hand wheel at the end of
the motor;
- The barrier gate must be operated with a hand crank when the power
is off;
- When the product leaves the factory, the tension spring has been
matched to a balanced state according to the length and weight of
the brake rod. It is not allowed to increase or decrease the length
and weight of the brake rod without authorization to avoid the
danger of losing balance. If changes are required, professional
personnel should be consulted for operation;
- Without installing the tension spring on the machine, it is
strictly prohibited to remove the tension spring when the brake
lever is in a horizontal position;
- When replacing or repairing the brake lever, it must be in the
lifting position and in a power-off state. Remove the tension
spring, and one person should hold the brake lever with their hand.
The other person should use the hand wheel at the end of the hand
cranked motor to lower the brake lever to a horizontal position
before replacing it.
|
