▋Weishi Series Straight Boom Parking Lot Barrier Gate JWS-D07 The Weishi Series Straight Boom Parking Lot Barrier Gate (JWS-D07)
is made of new stainless steel material, featuring excellent
corrosion resistance and heat resistance, which significantly
extends the product's service life. It is equipped with two types
of motion modes for selection, widely suitable for managing the
entry and exit of various types of vehicles. A new high-brightness
LED display is integrated into the appearance design, facilitating
the display of entry and exit information.
▋Technical Specifications | Product Model | JWS-D07 | | Device Name | Weishi Series Straight Boom Parking Lot Barrier Gate JWS-D07 | | power supply voltage | DC24V | | Landing speed | 2.5-6s adjustable, optional 0.3S/0.6S/1.2S | | Maximum rod length | 6m straight pole, 6m fence railing, 6m bent arm pole | | Color Selection | pearl white | | Protection level | IP54 | | rated power | 200w | | service life | ≥ 3 million times | | Rod material | 100mm × 45mm aluminum alloy material | | Operating Temperature | -30°C-75°C | | Chassis thickness | 2.0mm | | spray thickness | 60-120um | | Chassis decoration LED light |
| | Box salt spray test time | 72 hours | | Optional interface | 485, Bluetooth, TTL, TCP/IP, 4G, etc | | Support accessories | Infrared radiation, radar, ground sensing, traffic lights, sound
and light alarms, etc | | anti-smash | Resistance rebound, delayed pole drop, fleet mode, etc | | Remote control distance/encryption | ≥ 50m/Yes (open and unobstructed) | | Accessories List | 2 * Remote Control, 2 * Key, 2 * Head M10 × 70 Screw, 4 * 12 × 150
Expansion Screw | | Chassis dimensions | 985*340*300mm | | Box packaging size/weight | 1055×375×410mm/50KG |
▋Product Features
- Multiple protections: motor overcurrent, overload, short circuit
protection, motor fault protection, power reverse protectionSupport
external remote control input
- Support for open position, close position, and status relay output
- Supports RS232/RS485 serial communication
- Support opening counting function and unmanned automatic closing
function
- Support high sensitivity anti smashing and rebound protection
function
▋Product precautions
- The barrier gate must be operated with a hand crank when the power
is off;
- When the product leaves the factory, the tension spring has been
matched to a balanced state according to the length and weight of
the brake rod. It is not allowed to increase or decrease the length
and weight of the brake rod without authorization to avoid the
danger of losing balance. If changes are required, professional
personnel should be consulted for operation;
- Without installing the tension spring on the machine, it is
strictly prohibited to remove the tension spring when the brake
lever is in a horizontal position;
- When replacing or repairing the brake lever, it must be in the
lifting position and in a power-off state. Remove the tension
spring, and one person should hold the brake lever with their hand.
The other person should use the hand wheel at the end of the hand
cranked motor to lower the brake lever to a horizontal position
before replacing it.
|
