21 - 30 of 33
full automatic tray ic programmer
Selling leads
|
...IC incoming materials packaging on trays and manual tray placement. 2.Support offline programmer. 3.4 programming stations, 1-4 programming ...
2026-05-24 00:32:35
|
|
1.Support IC incoming packaging as tape and tray (manual loading) and tube4 programming stations, 1-4 programming stations can be customized to start. ...
2026-05-24 00:32:35
|
|
...simple and convenient, and easy to use. 4.Support four methods: tape in and tray out, tray in and tape out tape in and tape out,tray in and tray ...
2026-05-24 00:32:35
|
|
1. Support IC incoming packaging in tape and reel,tray. 2. Realize four modes: tape in and tape out,tape in and tray out, tray in and tray out, tray ...
2026-05-24 00:32:35
|
|
1.The feeding area can stack 50 tubes containing chips, and feed materials can be added at will without affecting production. 2.Golden finger contact ...
2026-05-24 00:32:35
|
|
1.The feeding area can stack 50 tubes containing chips, and feed materials can be added at will without affecting production. 2.Golden finger contact ...
2026-05-24 00:32:35
|
|
1.The feed is 20 tubes, and there are 4 programning stations,After the programing, the output is divided into 22 tubes,one of them is an NG tube and ...
2026-05-24 00:32:35
|
|
1.Support IC incoming materials to be packaged in tape and reel,enabling tape in and out,and automatically packaged after programming is completed. 2...
2026-05-24 00:32:35
|
|
The feed is 20 tubes, and there are 4 programning stations,After the programing, the output is divided into 22 tubes,one of them is an NG tube and the ...
2026-05-24 00:32:35
|
|
1.Just plug in and use,no air source required. 2.Feeding-film tearing-programming-sealing,any programming station can be set. 3.Production capacity ...
2026-05-24 00:32:35
|