Camel Energy ICHES Series Industrial Cabinet-type Energy Storage
System
Rugged Modular Solution for Heavy-duty Industrial Energy Storage
Demands
Quick Detail
- Product Line: ICHES-30/40/50/60 Industrial Grade
- Rated Energy Output: 30kWh / 40kWh / 50kWh / 60kWh
- Battery Chemistry: Lithium Iron Phosphate (LFP) – Industrial Grade
- System Nominal Voltage: 307.2Vdc / 409.6Vdc / 512Vdc / 614.4Vdc
- Continuous Charge/Discharge Current: 100A (Heavy-duty Rated)
- Environmental Protection: IP55 (Industrial Outdoor Standard)
- Cycle Durability: 6000 Cycles (25℃, 0.5C/0.5C, 90%DOD, 70% EOL)
- Thermal Regulation: Industrial Air-conditioning (2000W Cooling / 1000W Heating)
- Fire Suppression: Cabinet-integrated S-type Aerosol + Dual Sensors
- Industrial Scalability: Up to 4 Cabinets Parallel Operation
- Industrial Warranty: 5 Years (Extendable to 10 Years for Industrial Use)
- Certifications: IEC62619, CE, UN38.3 (Industrial Compliance)
- Dimensions: 840*2120*955mm (WHD, Inverter Excluded)
- Industrial Communication: CAN Bus (Stable for Industrial Environments)
Product Description
Camel Energy’s ICHES Series Industrial Cabinet-type Energy Storage
System is a rugged, high-performance solution engineered
exclusively for heavy-duty industrial scenarios. Built with industrial-grade durability at its core, this system
integrates robust LFP battery modules, a reinforced main control
unit, industrial-grade distribution components, heavy-duty
air-conditioning temperature control, cabinet-level fire
protection, and multi-layer safety safeguards—all housed in a
ruggedized cabinet designed to withstand harsh industrial
environments.
Tailored to meet the rigorous demands of industrial operations, the
ICHES Series offers four industrial-specific models
(30/40/50/60kWh) and supports parallel connection of up to 4
cabinets, enabling scalable capacity expansion to match the growing
energy needs of industrial facilities. With an IP55 protection
rating, it resists dust, moisture, and extreme weather conditions
common in factory yards, industrial parks, and remote industrial
sites—eliminating the need for additional protective enclosures.
The integrated industrial air-conditioning system maintains precise
internal temperatures, ensuring stable battery performance even
under prolonged high-load industrial operation, while the S-type
aerosol fire suppression system and multi-dimensional safety
protections
(over-voltage/over-current/over-temperature/short-circuit) mitigate
risks such as thermal runaway, critical for industrial site safety.
Equipped with a ruggedized main control module, the system features
real-time operational monitoring, WIFI remote management (optimized
for industrial network environments), and fault code
diagnostics—enabling unmanned operation and reducing on-site
maintenance requirements. Compliant with international industrial
standards (IEC62619/CE/UN38.3) and backed by a 5-year industrial
warranty (extendable to 10 years), the ICHES Series delivers
reliable, long-lasting energy storage for industrial peak shaving,
backup power, renewable energy integration, and microgrid
operation—empowering industrial users to optimize energy costs,
enhance operational resilience, and reduce environmental impact.
Product Specification
Core Industrial System Parameters
| Parameter | ICHES-30 | ICHES-40 | ICHES-50 | ICHES-60 |
|---|
| Number of Industrial Battery Modules | 6 | 8 | 10 | 12 |
| Rated Industrial Energy | 30kWh | 40kWh | 50kWh | 60kWh |
| System Nominal Voltage (Industrial Grade) | 307.2Vdc | 409.6Vdc | 512Vdc | 614.4Vdc |
| Operating Voltage Range | 268.8~345.6Vdc | 358.4~460.8Vdc | 448~576Vdc | 537.6~691.2Vdc |
| Max. Continuous Charge Current (Heavy-duty) | 100A | 100A | 100A | 100A |
| Max. Continuous Discharge Current (Heavy-duty) | 100A | 100A | 100A | 100A |
| Cycle Life (Industrial Operation) | 6000 cycles (25℃, 0.5C/0.5C, 90%DOD, 70% EOL) | | | |
| Industrial Communication Protocol | CAN Bus | | | |
| Scalability for Industrial Expansion | Up to 4 cabinets parallel | | | |
| Industrial Warranty | 5 years (extendable to 10 years) | | | |
Industrial Mechanical & Environmental Parameters
| Category | Specifications | | | |
|---|
| Dimensions (WHD) | 8402120955mm (Inverter Not Included) | | | |
| Net Weight (Industrial Ruggedized) | 580kg | 670kg | 760kg | 850kg |
| Environmental Protection Grade | IP55 (Industrial Outdoor Standard) | | | |
| Industrial Installation Method | Hoisting + Floor Fixing (Expansion Bolts, Base Bearing >2000Kg) | | | |
| Maximum Operating Altitude (Industrial Sites) | 2000m | | | |
| Operating Humidity (Industrial Environments) | 5%~90% RH (No Condensation) | | | |
| Charging Temperature (Industrial Operation) | 0℃ ~ 50℃ | | | |
| Discharging Temperature (Industrial Operation) | -20℃ ~ 55℃ | | | |
| Industrial Storage Temperature | -10℃ ~ 35℃ (Recommended) | | | |
| Recommended Industrial Storage Environment | 20℃~30℃, Dry, Ventilated, ≥2m from Industrial Heat Sources | | | |
Industrial Temperature Control & Fire Protection
| Component | Industrial-grade Specifications |
|---|
| Integrated Air-conditioning | Rated Voltage: 220Vac; Cooling Capacity: 2000W; Heating Capacity:
1000W; Protection Grade: IP55 (Industrial Standard) |
| Fire Suppression System | S-type Aerosol Fire Extinguisher + Industrial Smoke/Temperature
Sensors; Cabinet-level Detection & Rapid Suppression |
Industrial Safety Protections
| Protection Type | Industrial-specific Functions |
|---|
| Electrical Protection | Charging Overvoltage, Discharging Undervoltage, Charge/Discharge
Overcurrent, Short Circuit Protection (Heavy-duty Rated) |
| Temperature Protection | Charge/Discharge Over-temperature, Charge/Discharge Low-temperature
Protection (Adapted to Industrial Temperature Fluctuations) |
| Additional Industrial Protections | Cell Voltage/Temperature Difference Protection, Low Insulation
Resistance Protection, Contactor Adhesion Protection, Pre-charging
Failure Protection |
Industrial Certifications
IEC62619, CE, UN38.3 (Compliant with Global Industrial Standards)
Product Application
The ICHES Series Industrial Cabinet-type Energy Storage System is
purpose-built for industrial energy storage scenarios, delivering reliable performance for critical industrial
operations and supporting intelligent energy management strategies
tailored to industrial needs:
- Industrial Peak Shaving & Load Management
Optimizes energy consumption for factories, manufacturing plants,
and industrial facilities by charging during off-peak grid periods
and discharging during peak production hours—reducing peak demand
charges and lowering overall industrial energy costs.
- Critical Industrial Backup Power
Provides uninterrupted power supply for key industrial systems,
including production lines, precision industrial equipment,
industrial control systems, and safety monitoring
systems—preventing costly production downtime during grid outages.
- Industrial Renewable Energy Integration
Stores surplus energy from on-site industrial photovoltaic (PV) or
wind power systems, enabling spontaneous self-use of clean energy,
reducing reliance on the public grid, and lowering carbon emissions
for industrial facilities.
- Industrial Microgrid Construction
Integrates with diesel generators, industrial loads, and renewable
energy sources to form independent industrial microgrids—ensuring
stable power supply for remote industrial sites, industrial parks,
and off-grid industrial operations.
- Industrial Demand Response
Responds to grid demand response signals in real time, adjusting
charge/discharge cycles to assist grid peak regulation and
frequency modulation—enabling industrial users to earn grid
subsidies while supporting grid stability.
- Heavy-duty Industrial Load Smoothing
Mitigates power fluctuations caused by high-power, intermittent
industrial loads (e.g., motors, pumps, industrial
machinery)—optimizing the on-site power curve and protecting
industrial equipment from voltage surges or drops.
Product Features
- Industrial-grade Ruggedized Design
Built with heavy-duty components and a reinforced cabinet structure
to withstand harsh industrial environments (dust, moisture,
vibration, extreme temperatures), ensuring reliable operation in
factory yards, industrial parks, and remote industrial sites.
- Scalable Modular Architecture for Industrial Expansion
Four industrial-specific models (30/40/50/60kWh) and support for up
to 4 cabinets in parallel—enabling step-by-step capacity expansion
to match the growing energy needs of industrial facilities without
replacing the entire system.
- IP55 Industrial Environmental Adaptation
IP55 dustproof and waterproof protection rating, compliant with
industrial outdoor standards—eliminating the need for additional
protective structures and enabling flexible installation in diverse
industrial environments.
- Industrial Air-conditioning Temperature Control
Integrated industrial-grade air-conditioning with cooling (2000W)
and heating (1000W) functions, maintaining precise internal
temperatures to ensure stable battery performance under prolonged
high-load industrial operation.
- Cabinet-level Industrial Fire Suppression
S-type aerosol fire extinguishing system paired with industrial
smoke and temperature sensors—providing rapid fire detection and
suppression to mitigate thermal runaway risks critical for
industrial site safety.
- Multi-dimensional Industrial Safety Protections
Comprehensive safety safeguards tailored to industrial operations,
including over-voltage, over-current, over-temperature,
short-circuit, and cell balance protections—with fault
self-diagnosis and code display for quick troubleshooting.
- Industrial-grade Remote Management
WIFI remote access optimized for industrial networks, enabling
real-time monitoring of battery SOC, operational status, and fault
codes—supporting unmanned operation and reducing on-site industrial
maintenance costs.
- Long Cycle Life & Industrial Warranty
6000 deep charge-discharge cycles (70% EOL) and a 5-year standard
industrial warranty (extendable to 10 years)—ensuring long-term
reliability and low life-cycle costs for industrial users.
- Global Industrial Standard Compliance
Certified to IEC62619, CE, and UN38.3 standards—meeting industrial
safety and performance requirements worldwide, supporting
cross-border industrial deployment.
Product Advantage
- Industrial Ruggedness & Reliability
Engineered with heavy-duty components and a reinforced structure to
withstand the rigors of industrial environments—delivering
consistent performance under prolonged high-load operation,
temperature fluctuations, and harsh conditions.
- Scalable Capacity for Industrial Growth
Modular design and parallel expansion capability enable industrial
users to start with the required capacity and expand incrementally
as production scales—avoiding over-investment in initial energy
storage infrastructure.
- Comprehensive Industrial Safety
Multi-layered safety protections and cabinet-level fire suppression
system address critical safety risks in industrial
settings—protecting personnel, equipment, and production facilities
from potential hazards.
- Low Industrial O&M Costs
Remote monitoring, fault diagnostics, and long cycle life reduce
the need for on-site maintenance—lowering labor costs and
minimizing disruption to industrial operations.
- Energy Cost Optimization for Industry
Supports industrial-specific energy management strategies (peak
shaving, demand response, renewable integration) to significantly
reduce energy costs for manufacturing plants, factories, and
industrial facilities.
- Seamless Industrial System Integration
Compatible with industrial PV/wind systems, diesel generators, and
industrial loads—enabling easy integration into existing industrial
energy infrastructure without extensive modifications.
- Global Industrial Compliance
Certified to international industrial standards, ensuring
compatibility with industrial regulations worldwide—facilitating
cross-border deployment for multinational industrial enterprises.
- Enhanced Industrial Operational Resilience
Provides reliable backup power and load management capabilities,
reducing the impact of grid outages and energy price volatility on
industrial production—enhancing overall operational resilience.
FAQ
Q1: What models are available in the ICHES Industrial Series, and
how scalable is the system?
A: The industrial-focused series includes four models: ICHES-30
(30kWh), ICHES-40 (40kWh), ICHES-50 (50kWh), and ICHES-60 (60kWh).
It supports parallel connection of up to 4 cabinets, with a maximum
scalable capacity of 240kWh—ideal for industrial facilities with
growing energy needs.
Q2: Is the ICHES Series suitable for outdoor industrial
environments?
A: Yes, it features an IP55 industrial protection grade, designed to withstand dust, moisture, extreme temperatures, and
other harsh conditions common in outdoor industrial settings
(factory yards, industrial parks)—no additional protective
enclosures are required.
Q3: What type of temperature control system does the industrial
model use?
A: It is equipped with an industrial-grade integrated air-conditioning system with a 2000W cooling capacity and 1000W heating
capacity—maintaining stable internal temperatures to ensure
reliable performance under prolonged high-load industrial
operation.
Q4: What fire protection measures are included for industrial
safety?
A: The system integrates a cabinet-level industrial fire suppression system, including S-type aerosol fire extinguishers and industrial-grade
smoke/temperature sensors—enabling real-time fire detection and
rapid initial suppression to mitigate thermal runaway risks.
Q5: What is the cycle life and warranty for industrial use?
A: The industrial-grade battery modules offer a 6000-cycle life
(25℃, 0.5C/0.5C, 90%DOD, 70% EOL), and the system comes with a
5-year standard industrial warranty—extendable to 10 years to meet
long-term industrial operation requirements.
Q6: Does the system support remote management for industrial
facilities?
A: Yes, it features WIFI remote management optimized for industrial
networks. The WIFI name is the battery’s industrial SN code, with a
default password of jjwl123!@#. After connecting, access
172.16.254.254 (default account/password: admin/admin) to monitor
status and configure settings remotely.
Q7: What are the installation requirements for industrial sites?
A: The system uses hoisting + floor fixing (expansion bolts) with a base bearing capacity >2000Kg and base
height >200mm. Minimum gaps: ≥300mm (sides), ≥500mm (top), and
≥1000mm (right side if PCS is installed)—requires a flat, dry
industrial site without water accumulation.
Q8: What safety protections are tailored to industrial operations?
A: It includes multi-dimensional industrial safety protections:
over-voltage/undervoltage, overcurrent, short circuit,
over-temperature/low-temperature, cell voltage/temperature
difference, and low insulation resistance protection—with fault
self-diagnosis for quick industrial maintenance.
Q9: What communication protocol does the industrial model use, and
is it compatible with industrial inverters?
A: It uses the CAN bus protocol, widely adopted in industrial settings for stable communication.
It is compatible with mainstream industrial energy storage
inverters and offers optional matching inverters for seamless
industrial system integration.
Q10: What is the operating temperature range for industrial use?
A: The charging temperature range is 0℃ ~ 50℃, and the discharging range is -20℃ ~ 55℃—adapted to the temperature fluctuations common in industrial
environments, from cold warehouses to hot factory floors.
Q11: Is the system compliant with global industrial standards?
A: Yes, it is certified to IEC62619, CE, and UN38.3—meeting industrial safety and performance standards worldwide,
making it suitable for cross-border industrial deployment.
Q12: How are industrial faults diagnosed and resolved?
A: The system displays industrial-specific fault codes (e.g., E0
for overvoltage, E3 for discharge overcurrent, E6 for communication
faults). Users can reference the fault code table for initial
diagnosis, with remote troubleshooting or on-site support available
via the industrial after-sales team.
Q13: What transportation methods are approved for industrial
shipping?
A: As a UN38.3-certified Class 9 dangerous good, it supports sea and highway transportation (rail/air not recommended). Industrial packaging ensures an
inclination angle ≤15° during transit, with unpacked inclination
≤10° to protect ruggedized components.
Q14: What are the long-term storage requirements for industrial
facilities?
A: Store indoors in a dry, ventilated industrial space (20℃~30℃,
5%~80% RH), ≥2m from industrial heat sources, with SOC maintained
at 45%~55%. Recharge every 6 months, or within 15/30 days if
discharged (ambient temp >30℃/≤30℃) to prevent battery damage.
