15 - 25kWh Residential Energy Storage High Voltage LiFePO4 Battery WiFi Bluetooth

Camel HESB1 is a modular high-voltage residential energy storage battery with 15.36–25.6kWh capacity, IP55, WiFi/Bluetooth monitoring, and wide compatibility with mainstream inverters.

• Model: HESB1‑15 / HESB1‑20 / HESB1‑25
• Configuration: 3/4/5 modules, 15.36/20.48/25.6kWh
• Battery Type: LiFePO4 (LFP)
• Rated Voltage: 153.6V / 204.8V / 256V
• Communication: CAN 2.0 / RS485 / WiFi / Bluetooth
• Protection: IP55, indoor & outdoor
• Certifications: CE, IEC62619, IEC62040, UN38.3
• Warranty: 5 years (optional 10‑year extension)

Camel HESB1 is a plug‑and‑play high‑voltage residential energy storage system powered by safe LiFePO4 chemistry. It adopts modular stack design, supporting 15–25kWh single unit and expandable up to 75kWh via parallel connection. With smart BMS, WiFi/APP real‑time monitoring, and IP55 protection, it is widely compatible with mainstream hybrid inverters for solar self‑consumption, peak shaving, and backup power. Built for long cycle life, high safety, and easy installation, it is an ideal solution for household energy independence.

• Residential solar + storage systems
• Off‑grid & hybrid backup power supply
• PV self‑consumption & peak‑valley arbitrage
• Home energy management system
• Villa & small commercial energy storage
• Retrofitted energy storage projects

1. Modular & Expandable

   15–25kWh single unit; expandable up to 75kWh in parallel.

2. High Safety LiFePO4

   Advanced lithium iron phosphate battery with multi‑protection BMS.

3. IP55 Waterproof & Dustproof

   Suitable for indoor and outdoor shaded installation.

4. Smart Monitoring

   WiFi & Bluetooth; mobile APP for real‑time data & fault alarm.

5. Wide Inverter Compatibility

   Support CAN/RS485, match mainstream PCS/inverter brands.

6. Full Electrical Protection

   Over/under voltage, overcurrent, over/low temp, short circuit protection.

7. Easy Wall‑Mount Installation

   Compact stack design, clear wiring, quick commissioning.

1. High Compatibility

   Plug‑and‑play with most hybrid inverters on the market.

2. Long Service Life

   LiFePO4 cell, stable performance, long cycle life.

3. Flexible Capacity

   Modular design to meet different household energy demands.

4. Smart & Maintenance‑Light

   APP remote monitoring, low routine maintenance cost.

5. Global Certifications

   Comply with IEC, CE, UN38.3 for global market access.

6. Strong Environmental Adaptability

   Wide working temperature, IP55, anti‑corrosion.

A: It supports most mainstream hybrid inverters via CAN/RS485 communication.

A: Yes, IP55 protection allows outdoor shaded installation.

A: Up to 3 units in parallel, max capacity 75kWh.

A: Via built‑in display and mobile APP (WiFi/Bluetooth).

A: Standard 5‑year warranty, extendable to 10 years.

A: Charge: ‑10℃ to 50℃; Discharge: ‑20℃ to 50℃.

A: Maintain SOC 45–55% for long‑term storage; recharge every 6 months.

A: Overvoltage, undervoltage, overcurrent, over/low temperature, short circuit, insulation protection.