Stainless Steel Spindle Capping Machine with 60-150 BPM Speed and
Tool-Free Quick Adjustment Product Introduction Model DT-GS88 Easy-Operation In-Line Spindle Capping Machine is
specially built for small and medium-sized production scenarios and
start-up brands without a professional technical team. The whole
machine adopts a user-friendly one-touch operation design, with a
concise and durable structure, very few wearing parts, no
professional maintenance required in daily use, and novices can get
started quickly, making it a worry-free and labor-saving automated
capping equipment. Key Technical Highlights - Large-size visual key panel, one-touch start/stop, visual
adjustment of core parameters, no professional knowledge required,
novices can master the operation in 5 minutes
- Concise whole machine structure, no complex transmission parts, no
more than 3 core wearing parts, no professional maintenance
required in daily use, only simple cleaning needed
- Tool-free quick adjustment design, sealing tightness, roller
spacing and container positioning can be adjusted by hand without
professional tools
- Visual fault code prompt, ordinary personnel can quickly locate the
problem, and after-sales can guide the solution remotely without
professional on-site service
- Full-process debugging completed before leaving the factory, ready
for production after connecting to AC220V mains supply, no
professional installation and debugging required, ready to use out
of the box
- Wear-resistant and durable capping roller design, long service
life, convenient replacement, greatly reducing later maintenance
costs
Technical Specifications | Model | DT-GS88 |
|---|
| Production Capacity | 60-150 BPM |
|---|
| Applicable Size | 30-300mm |
|---|
| Power | 1.5KW |
|---|
| Sealing Width | 20-110mm |
|---|
| Cap Height | 30mm |
|---|
| Machine Size | L3000*W980*H1500(mm) |
|---|
Frequently Asked Questions - Q: Can I learn to operate this equipment quickly without any
contact with capping equipment before?A: Yes. It adopts a
minimalist one-touch start/stop design, and the basic debugging has
been completed before leaving the factory. No professional
knowledge is required, and novices can learn the basic operation in
5 minutes.
- Q: Does daily maintenance require professional personnel?A: No. The
whole machine has a concise structure with very few wearing parts,
only simple cleaning is required in daily use, no professional
maintenance operation is needed, and ordinary personnel can
complete it.
- Q: What should I do if the equipment breaks down?A: The system has
a built-in visual fault code prompt, which can quickly locate the
problem, and after-sales personnel can guide the solution remotely
without professional on-site service.
- Q: Do I need professional tools to change specifications?A: No. It
adopts a tool-free quick adjustment design, roller spacing, height
and sealing tightness can be adjusted by hand without any
professional tools.
- Q: Do I need professional personnel to install and debug on site?A:
No. The whole machine has completed full-process debugging before
leaving the factory, and can be put into production after unboxing
and power connection, no need for professional on-site
installation.
- Q: Is the replacement of wearing parts troublesome? Is the cost
high?A: No. There are only a few core wearing parts such as capping
rollers, which are easy to replace with extremely low procurement
cost, greatly reducing the later maintenance cost.
- Q: What is the capping qualification rate of this equipment?A:
Under rated working conditions, the capping qualification rate is
stably ≥99%, with an extremely low rate of bottle jamming and
crooked caps, no need for frequent manual intervention.
- Q: Is the service life of the equipment long?A: Yes. It adopts a
concise and durable structure design, no complex parts that are
easy to wear, long service life under normal use, and extremely low
failure rate.
- Q: What is the power supply requirement of the equipment?A: It
adopts AC220V conventional mains supply, which can be connected and
used with power supply from ordinary workshops and studios.
- Q: Is it troublesome for novices to adjust the sealing tightness?A:
No. The sealing tightness adopts a knob-type visual adjustment with
clear markings, and novices can quickly adjust to the ideal sealing
effect.
|
