>> LED radar speed signs made in 2 or 3 7 segment digit, can
set the limit speed number by remote controller. Inform the driver
limit speed: show green number in limit speed and show red number
out of limit speed.
>> When the vehicle drive into the radar detection area
(about 100m in the front of radar sign), the microwave radar will
automatically detect the speed of the vehicle and the speed will be
displayed in the sign to remind the driver to reduce driving
speed, which Effectively reduce the road traffic accidents caused
by high speed driving.
>> Speed feedback device has a significant eye-catching
induction driving function, can significantly reduce traffic
accidents, to
achieve safety guidance.
Static Constant Current Highway Solar LED Speed Limit Sign Mobile Variable Message Sign
|
Detailed Product Description
|
Static Constant Current Highway Solar LED Speed Limit Sign with Radar ≥30° Viewing Angle Products Overview Product Parameter 12'' Digitals Height 13.4'' Digitals Height Speed Feedback Device Components 1.Speed limited sign (indicating the speed limit of the road
section) 2.Such as "Please note your speed" and a dynamic LED (Conductor light-emitting diode) display, the above data shows the vehicle's speed 3.Microwave radar test the speed 4.Solar power with solar power supply system Speed feedback device install instructions 1.Fix the solar panel on the frame, and then fixed on the speed
feedback instrument with screws and nuts. The white wires are used
to connect the solar panels and the batteries in the speed feedback
box, and the positive and negative electrodes are connected one by
one. 2.The speed feedback device fixed on the road left or right, or just above the road ,so that the direction of the radar port to the car, the tilt angle of not more than 15 degrees, if it is fixed above the road, the radar fixed position should be radar Cavity oblique angle alignment to the car location. At the same time, the higher the distance between the radar and the ground, the farther away the radar work. Generally, The distance from the ground to radar in 2-7 m is better. 3.Open the speed feedback device's back cover, connected The radar data cable, control board connector one by one. And then adjust of the radar position, so that it position the car. 4.When the speed feedback device over the top,fixed the speed feedback with a screw to the column. Project Case Contact Shenzhen Glare-LED Optoelectronic Co., Ltd Add: 1-4 floor, B2
building, No. 10 Tongqing Road, TongXin village, Baolong avenue,
Longgang District, Shenzhen City, Guangdongprovince, China P.C:
518116 |
| Product Tags: Solar LED Speed Limit Sign Highway Solar LED Speed Limit Sign mobile variable message sign |
Related Products
|
Solar Powered Speed Warning Signs Led Display Portable Radar Speed Sign |
|
Road Warning Portable Radar Speed Sign with Solar Power Input AC 220V and LED Display |
|
Road Safety LED Display 50W Peak Power Solar Radar Speed Limit Sign for Road Warning |
|
Road Warning LED Solar Radar Speed Sign with 600*1000 Detection Range and Portable Design |
|
Road Warning LED Solar Radar Speed Sign with Pixel Pitch 188 3 Digitals and Solar Power |
|
Road Warning LED Solar Radar Speed Sign with 50W Peak Power and Single Color Display |
Email to this supplier