E-Ink displays are bistable, meaning they retain an image without continuous power, making them ideal for battery-powered or energy-harvesting devices such as e-readers, shelf labels, smart cards, and IoT dashboards. Additionally, their wide viewing angles and low eye strain characteristics make them especially suitable for text-focused or static image applications.
The following technical details will provide a comprehensive overview of the E-Ink module’s dimensions, resolution, interface, operating conditions, and other critical performance characteristics.
| Pin# | Single | Description | Remark |
| 1 | NC | No connection and do not connect with other NCpins | Keep Open |
| 2 | GDR | N-Channel MOSFET Gate Drive Control | |
| 3 | RESE | Current Sense Input for the Control Loop | |
| 4 | NC | No connection and do not connect with other NCpins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | TSCL | FC Interface to digital temperature sensor Clock pin | |
| 7 | TSDA | FC Interface to digita temperature sensorData pin. | |
| 8 | BSI | Bus selectionpin | Note 6-5 |
| 9 | BUSY | Busy state outputpin | Note 6-4 |
| 10 | RES# | Reset signal input. | Note 6-3 |
| 11 | D/C# | Data /Command control pin | Note 6-2 |
| 12 | CS | The chip select input connecting to the MCU. | Note 6-1 |
| 13 | SCL | Serial clock pinfor interface | |
| 14 | SDA | Serial data pin for inter face | |
| 15 | VDDIO | Power input pin for the Interface | |
| 16 | VCI | Power Supply pin for the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply for OTPProgramming | |
| 20 | VSHI | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin forPositive Gate driving voltageand VSH | |
| 22 | VSL | Negative Source driving voltage | |
| 23 | VGL | Power Supply pin forNegative Gate driving voltage,VOOM and VSL | |
| 24 | VCOM | VOOM driving voltage | |
