DKT External Rotor Air Conditioning Cabinet Duct Ventilation Equipment
|
|
Product introduction The DKT series centrifugal air conditioning fans are designed for minimal noise and compactness, with a rated flow of 900-9200m³/h and total pressure of 288-690Pa. Featuring external rotor motors for direct drive, these fans offer high efficiency, low noise, substantial airflow, reduced dimensions, and a sleek design. They are ideal for VAV air conditioners, ducted air conditioning units, VAV systems, and various HVAC and purification equipment.
Constructionof Product
-DKT series fans consist of housing,Wheel,baseplate,motor,shaft sleeve and air outlet flange.
1. HousingThe housing is made of hot-dip galvanized steel, with
aerodynamically designed side panels. The air inlet is integrally
stretched and formed, and the volute plate is clamped to the side
panels. Pre-tapped holes on the side panels allow for easy
installation according to specified outlet directions.
2. Impeller The forward-curved, multi-blade impeller is fabricated from
high-grade hot-dip galvanized steel, featuring aerodynamically
optimized blades for peak efficiency and noise reduction. Securely
attached via rivet claws to both hub and rim, it ensures
steadfastness under continuous max power operation. Each impeller
is meticulously tested for static and dynamic balance, adhering to
an internal control standard of G2.5 (ANSI AMCA-204).
3. Frame and plate
The Frame and plate is made of high-quality galvanized steel, and a
unique reinforcement process ensures sufficient strength. The
installation angle of the support plate can be adjusted according
to different user requirements. 4. Motor
The DKT series fans boast an external rotor, low-noise three-phase asynchronous motor with a stationary shaft and rotating casing. Mounted on the impeller hub, the motor directly drives the impeller via its casing's rotation. To meet diverse needs, these fans can integrate specialized motors adjustable through methods like three-phase regulators, thyristor controls, or frequency converters, enabling seamless adaptation to fluctuating system loads.
5. Flange
The flange is made of high-quality hot-rolled steel, with precision welding and anti-rust spray treatment. It features a refined appearance and possesses adequate rigidity and strength.
Product Performance Specifications
Data Curve
Dimensions diagram
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Cabinet Duct Ventilation Equipment DKT External Rotor Air Conditioning Cabinet | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Fresh Air Kitchen Ventilation With Ducted Wind Cabinet For Optimal Comfort And Efficiency |
|
Cabinet Centrifugal Fan for Extreme Thermal Management in Commercial Food Service and Industrial Processing Environments |
|
Exhaust Water Cooling Cabinet Commercial Centrifugal Ventilation Systems For Kitchen |
|
All-Copper Precision Motor and Dual Ball Bearings in Cabinet Centrifugal Fan for Enhanced Kitchen Ventilation |
|
OEM Water Cooling High-Efficiency Cabinet Centrifugal Fan for Commercial Culinary Environments |
|
Efficient Centrifugal Fan With Ducted Air Supply Cabinet Upgraded Water Curtain Cooling System For Commercial Kitchens |