Intuitive Display Leak Test Machine 220V Visual Leak Detection
Equipment
Product size and material:
- Outer dimension: Approx W 950×D 650×H 1000 (mm)
- Outer material: 304 stainless steel
- Inner dimension: Approx φ300×H 600 (mm)
- Inner material: Acrylic
Test principle:
IPX8 test: By filling the tank with compressed air and increasing
the water surface pressure, the pressure in the water increases
synchronously, thereby simulating different water depth
environments.
Introduction to products:
The visual leak detection test machine is a highly advanced tool
that utilizes intuitive visual display to precisely pinpoint leaks
in real-time. It boasts high sensitivity, enabling the detection of
even minute escapes.
- The test container is made of acrylic material, which is convenient
for users to observe and record4.
- The tank cover is raised and lowered by the cylinder to reduce the
operating risk of the test personnel.
- Built-in high-precision pressure sensor, which can display internal
pressure changes synchronously.
- The tank cover is connected with a mechanical safety valve (not
controlled by the software). If the set pressure exceeds the set
pressure, the safety valve will release the pressure directly to
ensure the safety of users.
- Controller: 7-inch touch screen + PLC, using Yuexin self-developed
software, which can be switched to multiple languages5.
- Protection measures: short circuit protection,overpressure alarm.
- There is an air tube in the container that can be connected to the
sample to evacuate the inside of the sample6.
Standard features:
| Item | Data |
Thickness of lid | 35mm |
Flange thickness | 40mm |
Tank thickness | 45mm |
Equipment net weight | Approx 180kg |
Pressure range | 0-3000kPa(30bar) |
Vacuum range | -50kPa(Max) |
Water depth range | 1-300 meters |
Adjustment method | Automatic adjustment |
Pressure accuracy | 1 kPa |
pressure error value | ±2kPa |
Set pressure of safety valve | 3.1Mpa(3100kPa) |
Testing time7 | 0-99999S |
Power supply | 220V/50Hz |
Power | 100w |
Installation requirements:
- Aisle: Before the equipment enters the factory, please confirm that
the space in the aisle, elevator, laboratory, etc. of the factory
area is sufficient for the equipment to pass through.
- Water source: Please prepare clean water source.
- Air source: Please prepare a compressed air source with an output
pressure of 0.6-0.8Mpa8.
- Power supply:220V/50HZ, 100w；please check whether it is compatible.
- Site space:≥W1500×D1400×2200mm
- The room needs to reserve a drain, and the bottom of the machine
can be connected to a water pipe for drainage.
Remark:
1. The pictures in this information are for customer reference
only. There may be color differences between the actual model and
the pictures.
2. This information only lists some test standards, which does not
mean that other test requirements are not met. Users are welcome to
communicate and discuss with our company.
3. The corresponding relationship formula between pressure and
water depth: P=9.8d (kPa, m)
4. It is necessary to prevent the sample from scratching the inner
wall of the container. Scratches will affect the observation and
video recording effects.
5. Currently only supports Chinese and English interfaces. Other
languages require users to provide language support, and the
manufacturer can remotely upgrade.
6. Users need to provide the interface shape and size of the sample
(such as three-dimensional drawings) in advance.
7. The factory-set time unit is generally seconds. If you want to
extend the test time, please explain it in advance.
8. The user needs to prepare an air compressor in advance
(recommended air storage capacity >90L). If you need us to buy
it on your behalf, you need to explain it in advance.
9. The photos may not match the actual product and are for user
reference only.
Product operating picture:
Tags: Leak Visualization Machine , Leak Inspection Machine with
Visual Display , Leak Detection Device
