1 Equipment Introduction
The chamfered wire-cutting machine is a hybrid unit that integrates
a chamfering knife holder into a conventional wire cutter,
performing both length-cutting and 45°/30° chamfering in one stroke
for wet green bricks of clay, shale or coal gangue fired bricks.
2 Cutting Features
• Chamfering and cutting are completed in one pass without
secondary handling;
• Adjustable chamfer angle from 45° to 90°;
• Individual wire quick-change on breakage, no shutdown;
• PLC servo synchronization, cutting accuracy ≤ ±1 mm.
3 Cutting Advantages
• One-step chamfering improves stacking and laying efficiency;
• Reduces corner chipping by ≥80 %;
• Modular blade holder, 10 min change-over;
• Eliminates manual edge trimming, overall cost reduced by ~15 %.
4 Machine Construction
• High-rigidity twin-screw frame ensures cutting stability;
• Swiveling chamfer knife seat with electric angle adjustment;
• Snap-in wire assembly for easy maintenance;
• Stainless steel water-cooling trough suppresses dust and prolongs
wire life.
5 Specifications
| Item | Value |
| Max cutting width | 1,200 mm |
| Cutting frequency | 15–45 cuts/min (frequency conversion) |
| Chamfer angle | 30°–90° (Adjustable) |
| Installed power | 11 kW |
| Applicable bricks | Solid Bricks, Perforated Bricks, Hollow Bricks |
6 Benefits of Chamfered Bricks
• Rounded edges make handling and construction safer;
• Mortar joints are fuller and neater, reducing subsequent
plastering;
• Enhances overall wall strength by lowering corner stress
concentration;
• Meets modern architectural demands for fair-faced or decorative
walls.
