Fully Automatic Carton Folder Gluer Stitcher Machine With Suction Belt Feeding

Suction Belt Feeding Fully Automatic Folder Gluer Stitcher

AUTO FEEDING UNIT

10 sets of Japan Nitta fully suction belt control system, Pneumatic Baffle Patting Device (Side Baffle). The patting frequency can be set via the touch screen with computer interface.

All units can be separated with one-button operation, featuring auto return-to-"zero" design.

Transmission shaft equipped with friction-type clutch to prevent machine damage from improper operation.

Main motor incorporates start delay protection function - the motor will not activate unless all units are properly locked.

U-shaped steel table side strips between machine units enhance operator safety during misoperations.

Motorized forward/backward movement on rear top board stacker reduces setup time.

Front board distance adjustment with manual synchronous mechanism enables convenient rapid configuration.

Supports both continuous feeding and skip feeding modes.

Board feeding counter for preset and real-time production quantity display.

Cam bearing transmission system minimizes wear to ensure smooth power transfer.

AUTO PRESSING UNIT

Lead edge feeder with independent servo motor drive for feeding,

Fully Vacuum Transfer feeder with pressing. No damage done the boards.

The pressure regulating device is installed on each guide plate, and the pressure can be adjusted according to the thickness of the cardboard.

AUTO FOLDING UNIT

Adaptive Gluing System

One or more adhesive applicators are installed before the folding section, adjustable based on carton dimensions. Each applicator comprises a coated rubber roller, an upper pressure roller, and a glue reservoir. Modules A and B feature independent geared motor drives for simplified and rapid adjustments.

Multi-Stage Folding Mechanism

The board undergoes 180° folding on the left/right secondary and fourth lines via three 60mm-wide base belts combined with dual 60mm-wide folding guides.

Adjustable Guide System

Multiple angled guide rollers are incorporated, allowing positional and angular adjustments to accommodate varying paper grades and board thicknesses, ensuring seamless folding operations.

Drive & Conveyance Components

• Independent servo-driven geared motors for user-friendly control

• Bottom belt reinforced with support bearings to maintain stable belt motion

•  

Customizable Speed Configuration

The independent transmission system enables speed optimization during carton forming based on box type requirements.

Calibration & Alignment Unit

Folded cartons transition from the folding section to the calibration zone, where upper/lower belt speeds are adjustable to minimize carton height deviations.

• Comprises A/B dual guide plates, each equipped with alignment rollers for carton dimension calibration during sealing

•  

• A precision servo-driven calibration system refines carton alignment post-roller adjustment, achieving optimal finishing results

•  

PUSHING & SANPING UNIT (Rectifying section)

Rectifying section the unique cam, bilateral drive, use Swiss linear bearings, make chrome bar sliding, the corrector plate is more powerful and more uniform correction on the carton, carton sealing to ensure accuracy. Using independent 80mm wide, 6mm Taiwan import belt soft thick moderate, not crushed products; the count part can move back and forth balanced; pressure, order transmission, ensure perfect quality;

Rectifying Section available, second adjust cardboard shape,

make sure carton better quality and reducing fish-tail within 2mm-0mm

STITCHING UNIT

ITALY ORIGINAL Nail head, High speed more than 1200nail/minute,

the school just the carton by two 60 width flat belt into the nail box department,

two belts can be adjusted according to the thickness of the cardboard Automatically.

correction block is installed at the junction of the nail box and the correction part, which is used in conjunction with the servo correction system of the correction part and the correction part

equipped with a patented design of swing type double screw nail head nail box, a clutch and brake with electric eye drive, nail / rate of more than 1000 minutes, high speed does not stop making the carton nailing speed at a constant speed transmission between the speed and the distance between the nail is directly related to when the nail box paste box when the nail head switch will automatically lift the nail box with the speed of the host.

TURNING OVER CARBOARD UNIT

Automatically flip over the carton to ensure the nail position on the side,not in mid,

Reduce damage to the surface of the carton,within 2mm-0mm

Ensure the subsequent stacking more orderly and stable.

COUNTING & STACKING UNIT

Automatic counting, photoelectric + infrared point control

Automatic counting, automatic stacking, faster, more accurate technology, higher efficiency

The counting speed is automatically adjusted according to the rotational speed of the nail box, manual operation mode and adjusting speed can also be selected