Anti Yellowing Hard Coating Car Paint Protection Film Transparent TPU PPF 7.5mil

Transparent TPU PPF Hot Sale 7.5mil Anti-yellowing Hard Coating Car Film Easy to Install

Here are the methods for maintaining PPF (Paint Protection Film):

I. Daily cleaning

Choose the right cleaner: Use mild car-specific cleaners and avoid strong acidic or alkaline cleaners to prevent damage to the PPF surface. For example, you can choose a neutral cleaner with a pH value around 7. This kind of cleaner has less harm to PPF and can effectively remove stains.

If an improper cleaner is used, it may cause problems such as discoloration and blurring on the PPF surface, affecting its aesthetics and protection effect.

Correct cleaning method: Gently wipe the PPF surface with a soft sponge or towel, and avoid using rough brushes or rags to prevent scratching the film surface. When cleaning, start from the roof and clean each part of the vehicle body in turn to ensure that each part is fully cleaned.

For example, during the cleaning process, pay attention to moderate force and do not use excessive force. You can spray the cleaner on the sponge or towel first, and then gently wipe the PPF surface to avoid spraying the cleaner directly on the film to prevent the cleaner from flowing into the edge gap of the film and affecting its adhesion.

Clean in time: When there are pollutants such as dust, stains or bird droppings on the vehicle surface, clean them in time to avoid the pollutants adhering to the PPF surface for a long time and causing damage to the film. For example, if bird droppings are not cleaned for a long time, the acidic substances in them may corrode the PPF, resulting in spots or discoloration on the film surface.

Generally speaking, it is best to clean within 24 hours after finding pollutants to ensure the cleanliness and integrity of the PPF.

II. Avoid high temperature and chemical substances

Avoid high temperature environments: Try to avoid parking the vehicle in direct sunlight or high temperature environments for a long time, because high temperature will accelerate the aging of PPF and reduce its protection performance. For example, in hot summer, you can choose to park the vehicle in a shady place or use a car cover to reduce the impact of direct sunlight and high temperature on PPF.

If the vehicle is exposed to high temperature environments for a long time, PPF may have problems such as discoloration and blistering, affecting its aesthetics and service life.

Stay away from chemical substances: Avoid the vehicle coming into contact with chemical substances such as acid rain, tree sap, and organic solvents. These chemical substances may erode PPF and lead to a decline in its performance. For example, if the vehicle is parked under a tree, clean the tree sap in time to prevent the tree sap from adhering to the PPF for a long time and causing damage to the film.

When encountering chemical pollution, rinse with clean water in time and use a mild cleaner to clean to remove chemical residues.

III. Regular inspection and maintenance

Inspect the PPF surface: Regularly check the surface condition of PPF to see if there are problems such as scratches, blisters, and discoloration. If problems are found, deal with them in time to avoid the problems from expanding. For example, you can carefully check the PPF surface with a magnifying glass or flashlight to ensure that it is intact.

For minor scratches, you can try to repair them with a hot air blower or hot water to let PPF recover by itself at a certain temperature. If the scratch is more serious, professional personnel may be needed for processing.

Maintain the edge of PPF: The edge of PPF is easily eroded by dust, moisture, etc., thus affecting its adhesion and protection effect. Therefore, regularly check the edge of PPF to ensure that it is closely attached to the car paint surface. If the edge is found to be lifted or loose, deal with it in time.

For example, you can gently heat the edge of PPF with a hot air gun or lighter to make it reattach to the car paint. You can also use a special edge sealant for treatment to enhance the edge sealing of PPF.

Professional maintenance: Regularly send the vehicle to a professional car beauty shop for maintenance and let professionals conduct a comprehensive inspection and maintenance of PPF. For example, professionals can use professional equipment and cleaners to conduct deep cleaning and care for PPF and extend its service life.

Generally speaking, it is recommended to conduct professional maintenance once every six months or a year to ensure that the performance and appearance of PPF always remain in good condition.

FAQ

Q1. Can I put my logo on the film?
A: Yes, your logos can be put on the film, also on the boxes & cartons.

Q2. How can I get samples?
A: Free samples, please contact me by email or online chatting, samples will be sent to you in one day after I got the shippng information of yours

Q3. How can you control your quality?
A: 1. Check all the materials before production, pick out all the bad ones;
2. During the production, workers will check every hour to make sure the production system runs correct;
3. Goods are 100% tested before delivery to you.

Q4. Can you produce according to my samples?
A: Yes, our factory has specialized technology & advanced equipment. We will first analyze your sample, and then make the good according to your samples.

Q5. Will your window tint peel?
A: Qaulity window tint is guranteed not to peel once it has been curved to the glass.

Q6: How do you make our business long-term and good relationship?
A:1. We support you with good quality and competitive price;
2. Always be here when you need us;
3. You will get new product info. from us so you can get the market earlier;
4. We respect you and treat you as our friend, no matter where you are from.

Q7. What is your sample policy?
A: We can supply the sample when we have it in stock, but customers have to pay the sample charge and the courier fee. For A4 cutting samples, the samples are free.

Q8. Why choose us ?
We have successful experience of operating the solar film for 8 years in the world.The concept of "innovation, quality, service, persistence, dedication and gratitude. With professional solar film knowledge training and technical guidance.