Automatic Analysis TDR Cable Fault Locator Minimum Resolution 0.10 M

Description

This cable fault locator is a special instrument for measuring and analyzing the status and fault distance of power cables.  Cable speed measurement, cable length test, cable fault distance test.

Technical specification

The system has an automatic ranging function

Low voltage pulse sampling interface

High voltage flashover(ICE) sampling interface

User Interface Introduction

1. Display: 10.1-inch full-color TFT touchscreen display;

2. Grounding: Safety grounding terminal;

3. Signal: Low-voltage pulse method pulse signal output interface, high-voltage flashover method sampler, and multi-pulse method coupler receiving signal input interface;

4. USB: Import waveform files to a computer via USB communication;

5. Power Socket: Instrument operating power supply, AC 220V connection port/charging port;

6. Fuse: Fuse installation location for the AC 220V power supply system;

7. Power Switch: "I" position, using AC 220V power to power the system;

"II" position, using the internal battery to power the system; when the "Power Socket" is connected to AC 220V power, the battery is also charged;

"O" position, turning off the system power;

8. Amplitude: Adjust the amplitude knob when acquiring waveforms to change the amplitude of the acquired waveform;

9. Operation Knob: Rotary button for system interface operation control, rotate to select and press to confirm;

10. Displacement: When acquiring waveforms, adjust the displacement knob to change the baseline height of the acquired waveform.