| Data sampling rate | 60MHz, 120 MHz, 240MHz, 400MHz; | | Pulse amplitude | 400Vpp | | Pulse width | 0.1uS and 2uS | | Measuring distance | ≥68km | | Reading resolution | 0.1m | | Accuracy | less than 0.5m | | Three types of test cable length | <1Km (short distance); <3Km (medium distance); >3 Km (long
distance) (test low-voltage pulse amplitude: 400Vpp) | | Pulse coupler withstand voltage | 35kV DC | | Working conditions | temperature -25℃~+65℃, relative humidity 85%, atmospheric pressure
750±30mmHg. |
Features (1) 12-inch industrial-grade computer control, touch operation
mode;
(2) Windows operating system, visual wireless expert guidance, 4G
network;
(3)With functions such as distance measurement and speed
measurement;
(4)400MHz sampling frequency, minimum resolution 0.5m (100m/us)
(5)Fully automatic continuous sampling, never miss any discharge
waveform;
(6)Test method: multiple pulse sampling, induction sampling,
flashover sampling, low-voltage pulse sampling
(7)The reflected signal sent by the pulse coupler is automatically
displayed, and the full-length waveform of the open circuit of the
cable is displayed at the same time. This makes the representation
of the fault characteristic waveform extremely simple.
(8)With the function of storing massive test waveforms: The
waveforms tested on site can be conveniently stored in the
instrument in a prescribed order for recall and observation at any
time.
(9)The measured fault point waveform and the good-phase full-length
open-circuit waveform can be displayed on the screen at the same
time for comparison on the same screen and superimposed comparison.
Makes the judgment of the fault distance more accurate.
(10)Built-in polymer lithium battery power supply: it can work
continuously for more than 4 hours after being fully charged. Fully
meet the requirements of on-site testing. It can also work with an
external AC power supply.
(11)Eight pulse transmission and fault reflection signals are
automatically displayed, and the full-length waveform of the cable
open circuit is displayed at the same time. This makes the
representation of the fault characteristic waveform extremely
simple. |
