Fuwa spring 180mm

Material Analysis

The Fuwa spring 180mm is likely crafted fromhigh-carbon steeloralloy steelto ensure durability and resilience under heavy loads. These materials are commonly used in automotive springs due to their excellent strength, fatigue resistance, and ability to withstand continuous tension and compression cycles.

Key Parameters

1. Length: 180mm

• This length is optimized to fit within the Fuwa adjusting arm assembly, providing the necessary tension while maintaining compatibility with the overall brake system design.

2. Wire Diameter and Coil Specifications

• While specific wire diameter and coil spacing details are not provided, such parameters are typically tailored to achieve the desired spring rate (stiffness) and load capacity.

3. Spring Rate (Stiffness)

• The spring rate determines how much force is required to compress the spring by a certain distance. This parameter is crucial for ensuring proper brake adjustment and system stability.

4. Load Capacity

• Designed to withstand the forces exerted during brake adjustments, the spring must maintain its integrity under repeated loading cycles without permanent deformation.

5. End Configuration

• The spring may feature hooks, loops, or other end configurations to facilitate secure attachment within the adjusting arm assembly.

6. Surface Treatment

• To enhance corrosion resistance and prolong service life, the spring may undergo surface treatments such as zinc plating, phosphate coating, or specialized paints.