High-Frequency Tower UPS Single Input Single Output Dual Conversion
Online Operation Product Introduction / Introduction Power Range: 1K VA Working mode: single input and single output, double conversion online operation. Application scope: Widely used in various industries such as government, finance,
communications, education, transportation, meteorology, radio and
television, industrial and commercial taxation, medical care,
energy and electricity, etc. Features: · True online double conversion
· Microprocessor control ensures high reliability
· Input power factor correction
· Output power factor can reach 0.8
· Wide mains input range (110 V – 300 V)
· Efficient frequency conversion mode
· Generator compatible
· Optional exquisite SNMP card can be perfectly monitored alone or
with USB, RS232
· Simple operation control through the display, and comprehensive
display monitoring UPS status
· ECO mode provides energy saving effect
· Emergency power off (EPO)
· Models above 6K use DSP technology, built-in maintenance bypass
switch (optional)
· Smart battery charging design extends battery life and
performance
· Built-in isolation transformer (optional) Technical Parameters | model | H1K | | Phase | Single-phase grounding | | capacity | 1000 VA / 800 W | | enter | | Voltage range | 110 -300VAC at 50% load | | 160 -280 VAC at 100% load | | Frequency range | 40Hz ~ 70Hz | | Power Factor | ≧0.99 | | Output | | Output voltage | 200/208/220/230/240VAC | | Voltage range (battery mode) | ± 1% | | Frequency range (synchronous correction range) | 47~53 Hz or 57~63 Hz | | Frequency range (battery mode) | 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz | | Surge ratio | 3:01 | | Harmonic distortion | ≦ 3% THD (Linear Load) | | ≦6% THD (non-linear load ) | | Conversion time | AC to DC | 0ms | | Inverter to Bypass | 4 ms (under standard conditions) | | Waveform (Battery Mode) | Pure sine wave | | efficiency | | Mains mode | 88% | | Battery Mode | 83% | | Battery | | Standard Machine | Battery Model | 12V / 9AH | | quantity | 2 | | Maximum charging current | 1.0A (max) | | Long-acting machine | Battery Model | Depends on battery configuration | | quantity | 3 | | Maximum charging current | 1A/2A/4A/6A (adjustable) | | Appearance | | LCD or LED display | Load size, Battery capacity, AC mode, Battery mode, Bypass mode,
Fault indication | | Dimensions | | Standard Machine | Dimensions, depth x width x height (mm) | 282 X 145 X 220 | | Net weight (kg) | 9.8 | | Long-lasting models | Dimensions, depth x width x height (mm) | 282 X 145 X 220 | | Net weight (kg) | 4.1 | | Usage Environment | | Temperature and humidity | Relative humidity 20-90% and temperature 0- 40°C (non-condensation) | | noise | Less than 50dBA @ 1 meter | | Control Management | | Smart RS-232 / USB | 支持 Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux, Unix, and
MAC | | Optional SNMP | Power management supports SNMP management and network management |
*When 1-3KVA UPS is set to constant voltage and constant frequency
mode, the output power will be reduced by 80%, and when the output
voltage of the UPS is set to 208VAC, the output power will be
reduced by 80%. When
6/10KVA UPS is set to constant voltage and constant frequency mode,
the output power will be reduced by 60%, and when the output
voltage of the UPS is set to 208VAC, the output power will be
reduced by 90%.
*The above commonly sold models do not support redundant parallel
operation.
*200/208/220/230/240VAC is only applicable to long-term machines
(200VAC is only applicable to 1-3KVA) | MODEL | Apex 400 | Apex 600 | Apex 800 | Apex 1k | Apex 1.5k | Apex 2k | Apex 3k | | CAPACITY | 400VA/240W | 600VA/360W | 800VA/480W | 1000VA/600W | 1500VA/900W | 2000VA/1200W | 3000VA/1800W | | INPUT | | Voltage | 110/120 VAC or 220/230/240 VAC | 220/230/240 VAC | | Voltage Rangle | 81-145 VAC / 162-290 VAC | 162-290 VAC | | Frequency Range | 60/50 Hz (Auto sensing) | | OUTPUT | | Output Voltage | 110/120 VAC or 220/230/240 VAC | 220/230/240 VAC | | AC Voltage Regulation(Batt Mode) | ± 10% | | Frequency Range(Batt Mode) | 50 Hz or 60 Hz ± 1 Hz | | Trensfer Time | Typical 2-6 ms | | Waveform(Batt Mode) | Simulated Sinewave | | BATTERY | | Battery Type&Nunber | | 12V/4.5AH*1 | 12V/7AH*1 | 12V/9AH*1 | 12V/7AH*2 | 12V/9AH*2 | 12V/9AH*2 | 12V/10AH*2 | | Typical Recharge Time | | 4-6 hours recover to 90% capacity | | PROTECTION | | Full Protection | | Overload, discharge, and overcharge protection | | INDICATORS | | LCD Model | Input voltage, output voltage, battery capacity, load level and UPS
status | | LCD Model | AC Mode | Green lighting | Green lighting | Green lighting and 4 LEDs indlicating load level | | Battery Mode | Green flashing | Yellow flashing | Green lighting and 4 LEDs indlicating battery capacity | | Fauit | N/A | Red lighting | Red lighting | | ALARM | | Battery Mode | | Sounding every 10 seconds | | Low Battery | | Sounding every second | | Overload | | Sounding every 0.5 second | | Fault | | Continuously sounding | | PHYSICAL | | LCD Model | Dimension,D*W*H(mm) | 300*101*142 | 320*130*182 | 390*147*205 | | Net Weight(kgs) | 3.7 | 4.4 | 5 | 7.8 | 10.4 | 10.6 | 15.1 | | LCD Model | Dimension,D*W*H(mm) | 279*101*142 | 320*130*182 | 390*147*205 | | Net Weight(kgs) | 3.55 | 4.2 | 4.9 | 8.2 | 10.4 | 11 | 15.1 | | ENVIRONMENT | | Humidity | | 0-90 % RH @ 0- 40°C (Non-condensing) | | Noise Level | | Less than 40dB | Less than 45dB | | Product speciffcations are subject to change without further
notice. |
| model | DX202 | DX302 | DX402 | DX502 | DX602 | | Rated power | 2000W | 3000W | 4000W | 5000W | 6000W | | Peak power (MS) | 4000VA | 9000VA | 12000VA | 15000VA | 18000VA | | Battery input | | | | | | | Nominal voltage | 12V/24DC | 24V/48VDC | 24V/48VDC | 48VDC | 48VDC | | Charging current | 0-30A | | Charging voltage | 13.8VDC for 12V(*2 for 24V;4 for 48VDC;8for 96V | | Battery High voltage alarm | 15VDC for 12V(*2 for 24V;4 for 48VDC;8for 96V | | Low voltage alarm of battery | 10.5VDC for 12V(*2 for 24V;4 for 48VDC;8for 96V | | Battery type | Lithium battery/gel (customized) | | Communication input | | | | | | | Voltage | L N+PE 110V/120V;220V/230V/240V | | Voltage range | 75-135VAC for 110V;145-265VAC for 220V | | frequency | 50/60HZ adaptive | | Communication output | | | | | | | Voltage | L N+PE 110V/120V;220V/230V/240V(Can be set) | | frequency | 50/60HZ±1%(Can be set) | | Surge power | 4000VA | 9000VA | 12000VA | 15000VA | 18000VA | | Efficiency | 89% | 90% | 90% | 90% | 90% | | conversion time | ≤8ms | | | | | | Output waveform | Pure sine wave | | protection | | | | | | | Display | Forced air cooling | | heat dissipation method | Overvoltage protection, undervoltage protection, overload
protection, surge protection, over temperature protection, short
circuit protection, etc | | display | LCD+LED | | communication (optional) | RS232/RS485/APP/WIFI | | Working mode | | | | | | | Priority given to mains electricity | Prioritize the use of State Grid power supply, and automatically
switch to inverter (battery) mode during power outages | | Power saving mode | Automatically switch to sleep mode when no load is detected in the
inverter state | | Priority given to photovoltaics | Prioritize the use of photovoltaic power generation, with
complementary batteries and the power grid | | Photovoltaic input | | | | | | | Maximum photovoltaic input | 12V:18-150VDC | 24V:36-150VDC | 48V:60-150VDC | | Maximum charging current | MPPT 60A | | Maximum photovoltaic power | For 12V:System:750W | For 12V:System:1500W | For 12V:System:3200W | | Best MPPT | For 12V:System:18-50V | For 12V:System:36-80V | For 12V:System:72-110V | | Maximum working voltage | For 12V:155VDC | For 24V:155VDC | For 48V:155VDC | | Open circuit | | | | | | | voltage environment | 0%~95% No condensation | | relative humidity | “-10℃~40℃ | | working temperature | ”-15℃~60℃ | | Storage temperature | | | | | | | Packaging size (D * W * H) mm | 630*450*290 | | Weight (kg) | 20kg | 23kg | 28kg | 32kg | 35kg |
——UPS power solution service provider—— |
