PLC Controlled Automatic Wire Soldering Machine 5A For DIP

ZT PLC Controlled Automatic Soldering Machine for DIP with 3 and 0.6-1.5mm Solder Wire

The advantages of automatic soldering machine include the following:

1. Welding quality

• High consistency:

• Welding parameters such as temperature, time, tin delivery, etc., can be precisely set and controlled to ensure that the quality and shape of each solder joint remain highly consistent, avoiding the difference of solder joints caused by fatigue, emotion and other factors during manual welding, and effectively improving the overall welding quality of the product.

• For electronic components that require high welding accuracy, such as chip pin welding, the automatic soldering machine can precisely deliver the solder wire to the specified position and weld the solder joint to the standard.

• High stability: The equipment adopts high-quality imported parts and finished parts, with excellent wear resistance, not easy to fail, and can run stably for a long time to ensure the stability of welding quality. In contrast, manual welding may cause welding errors due to hand shaking, obstructed vision and other reasons.

2. Production efficiency

• Fast speed: the soldering speed is much faster than the traditional manual soldering machine, which is several times or even higher, and can complete a large number of welding tasks in a short time, which can replace 3-5 workers for soldering, greatly improving production efficiency and meeting the needs of large-scale production.

Continuous operation: can work continuously for 24 hours, not affected by fatigue, rest and other factors. Manual welding is difficult to maintain a high strength working state for a long time, and requires regular rest, resulting in a waste of production time.

3. Cost control

• Labor cost reduction:

A machine only needs one person to operate, and even a person can operate multiple machines at the same time, reducing the need for a large number of labor, thereby reducing the labor cost of the enterprise.

• Avoid production stagnation due to employee turnover and the cost of training new employees. It is relatively easy for new employees to start operating the automatic soldering machine, the training time is short, and it can be quickly put into production.

• Material cost savings: The amount of solder can be accurately controlled to avoid material waste caused by unstable tin delivery during manual welding. At the same time, due to the improvement of welding quality, the material loss caused by defective products is reduced.

• Reasonable energy consumption cost: the energy required is comparable to that of ordinary manual soldering machines, and the energy consumption will not be greatly increased because of automation, which ensures the production efficiency while saving energy.

 Product Parameter:

Specification: