Test Equipment Industrial Power Supply ATE Equipment LED Driver Power Supply Testing Systems

Features of the Top-Smart 2000 ATE Power Supply Testing System:

Open

     • An open hardware platform that allows for the addition or removal of various testing devices according to customer needs (including devices with GPIB, RS-232, USB interfaces, etc.)

     • The ATE power supply testing system supports simultaneous testing of multiple single-group/multiple-group output power supplies, significantly increasing production line capacity.

     • An open software platform, the ATE power supply testing system can be expanded with new test items and functions based on customer testing requirements.

     • The ATE power supply testing system supports simultaneous multi-lane barcode pre-scanning and scanning during testing, enhancing overall testing speed.

Universal

    • The ATE power supply testing system supports testing of various power supplies (LED power supplies, adapters/chargers, PC power supplies, inverters, communication power supplies, etc.)

    • Complies with ENERGY STAR and IEC 62301 measurement requirements.

    • Supports Manufacturing Information System (ShopFloor) interface.

    • The ATE power supply testing system supports testing of various power parameters under CV, CC, CR, LED modes.

    • Optimizes display mode, allowing for any combination of hardware configurations.

High-Speed

     • The ATE power supply testing system supports simultaneous testing of multiple single-group/multiple-group output power supplies, significantly increasing production line capacity. (The testing speed for LED power supplies/adapters/chargers is more than double that of the widely used 6000 series power automatic systems.)

     • Conducts parallel barcode scanning during testing, greatly improving testing speed.

Professional

     • The ATE power supply testing system supports complete testing of LED driver power supplies.

     • Can accurately read the average current and effective current of the tested LED driver.

     • Easily starts low-power LED driver power supplies without pulling down the LED driver due to the high current surge from starting the electronic load.

     • The ATE power supply testing system sets realistic LED on-threshold values and post-on operating point resistance through system settings, making the tested current and voltage waveforms very close to real LEDs.

     • More realistic high-frequency current waveforms.

     • Dimming function test: dimming current, dimming frequency, dimming period (requires additional related hardware devices).

Top-Smart 2000 ATE Power Supply Testing System Test Items: