Solid Chemical Dosing System Small Chemical Dosing Pump Automatic

Solid Chemical Dosing System Small Chemical Dosing Pump Chemical Dosing System Automatic

1. Composition of dosing device

Dosing device consists of solution tanks, a number of flanges, valves and other components. Configuration of a metering pump or two metering pumps. For one with a backup, so that it is convenient for users to carry out maintenance and replacement of parts without stopping the state.

The main components of this device are.

(1) solution tank

(2) agitator

(3) level meter

(4) filter

(5) safety valve

(6) metering pump

(7) Buffer

(8) ball valves/check valves/stop valves

(9) pressure gauges and corresponding piping

2. The use of dosing device

Users in accordance with the proportion of dosing solution to configure the pharmaceutical, through the metering pump to accurately add

1. Connect the dosing device, then check each flange interface, and tighten it to avoid fluid leakage.

2. Connect the power supply of metering pump.

(1) open the junction box of the electric control cabinet, and connect the three-phase four-wire power supply line that meets the requirements of the metering pump motor to the corresponding terminal.

terminal.

(2) start the mixer momentarily by controlling the operation switch, observe the motor steering, if the steering is correct, fix the junction box.

If the steering is correct, fix the junction box. If the steering is not correct, adjust the phase sequence and then fix the junction box.

3. Close the drain valve. Fill the liquid container with liquid.

4. Open the dosing system valve, start the metering pump.

5. The dosing device is equipped with one metering pump, one of which is for the dosing pump, and the other one is the backup pump.

3. Specification

4. FAQ

Q: Are you a trading company or a manufacturer?
A: We are a manufacturing company. We are a professional manufacturer of dust removal and conveying equipment with more than 20 years of production.

Q: Where is your factory located?
A: The factory is located in Hebei, China, 50 minutes by rail from Beijing.

Q: Do you offer OEM services?
A: Yes. Any required logo is available.

Q: What is the production capacity of your company?
A: Our factory covers an area of more than 20,000 square meters and produces 2,000 machines a year.