Plastic Squeezer Dryer 1000kg per Hour with 160kw Motor Power for High Moisture Reduction in PP PE Films

PP PE Squeezer Dryer 1000kg per hour PP PE film washing line

1. High Moisture Reduction

   • Removes up to 95% water content from plastic flakes/scraps, significantly reducing drying time and energy costs.

2. Energy Efficiency

   • Cuts thermal drying energy consumption by 50-70% through mechanical dewatering (vs. traditional thermal methods).

3. Preserves Material Quality

   • Prevents polymer degradation by eliminating prolonged high-heat exposure (critical for PET, PP, HDPE recycling).

4. Compact Footprint

   • Requires 30% less space than centrifugal dryers or hot-air systems.

5. Low Maintenance

   • Robust stainless-steel construction with < 0.5% annual downtime for wear parts replacement.

Please kindly check the below information: 

The raw material  picture before processing and the after processing

Application of the squeezer dryer:

Used in the PP,HDPE and  LLPE film, such as agricultural film, greenhouse film, post-consumer plastic film, PE household waste film, PP woven bag cleaning and drying, etc.

Structure of the squeezer dryer:

It includes: motor, gearbox, screw, cylinder, heater and die mold, cutting device,wind transmission and material storage silo.

Principle of the squeezer dryer:

It uses the principle of extrusion dehydration. The rotating screw to push and squeeze the raw material to the die mould , and cut the material into about 10-60mm through the die mold and pellet cutting device. The moisture content after extrusion is within 3-5%. After pelletizing it will be blown into the material storage silo for extrude pelletizing. The final products will be the regular pellets.

Benefits of the squeezer dryer:

• Make the traditional film cleaning and drying simple. Without the dehydrator, raw material can be directly from the rinse tank.
• Expressed dry, 3% -5% of the material moisture can be used directly for granulation.
• Easy to operate, with automatic control.
• Screw and cylinder using 38CrMoA1A, nitride depth 0.5mm
• Good electric parts, such as Schneider low voltage electric parts and switch, Carlo solid relay.
• Strong after sale service.With one year guarantee time for the non-wear parts.

Models:

Since many years tests and customers feedbacks, we make great improvement on the squeezer to make sure it run stable and make high performance.

Below is some pictures:

1 complete set of  squeezer dryer

2 Squeezer cutter system and device

3 Squeezer die mould