Compact 0.96 Inch OLED Display 128x64 SSD1315 20pin Soldering FPC

0.96 Inch OLED Display White Color 128x64 Dots SSD1315 20pin Soldering FPC

Key Features:

1. Resolution: Typically, 128x64 pixels.

2. Color: Monochrome (usually white, blue, or yellow).

3. Interface: I²C (2-wire) or SPI (4-wire) communication protocols.

4. Driver IC: SSD1315, similar to the SSD1306 but offers better contrast, reduced power consumption, and higher performance.

5. Voltage: Works at 3.3V or 5V (with an onboard regulator for 5V systems).

6. Low Power: Ideal for battery-powered applications.

7. Compact Size: Suitable for wearables, IoT projects, and small gadgets.

Detailed Parameters:

OLED Screens ( 0.42 inch~3.12 inch ):

We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.

Advantages of SSD1315 over SSD1306:

• Improved refresh rate and contrast ratio.

• Wider range of operational temperatures.

• Reduced electromagnetic interference (EMI).

Common Applications:

• Small electronic gadgets.

• IoT dashboards.

• Portable health devices.

• Displays for Arduino, Raspberry Pi, ESP32, etc.

Interfacing Tips:

• Libraries: Use popular libraries like Adafruit's GFX and SSD1306 libraries for Arduino, or u8g2 for various platforms.

• Connections: Ensure correct wiring based on I²C (SCL, SDA, VCC, GND) or SPI (MOSI, MISO, SCK, CS).

• Initialization: The SSD1315 requires specific commands for setup. Most libraries abstract this for you.