0.96 Inch OLED Screen Module White 128*64 Pixels SSD1306 I2C Interface

0.96 Inch OLED Display Module White 128*64 Pixels SSD1306 I2C Interface

Advantages of a PMOLED Display:

1. High Contrast and Clarity: Each pixel emits its light, offering vivid visuals even in low-light environments.

2. Low Power Consumption: Suitable for battery-powered devices; power usage depends on the number of active pixels.

3. Wide Viewing Angle: Almost unrestricted visibility, making it ideal for small wearable or embedded systems.

4. Fast Response Time: Excellent for applications needing rapid updates, such as animations or real-time data.

5. Lightweight and Compact: Perfect for compact designs and portable electronics.

Detailed Parameters:

OLED Screens ( 0.42 inch~3.12 inch ):

We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.

Connecting a 0.96-inch PMOLED Module:

1. Pin Configuration (Typical I2C Setup):

• VCC: Power supply (3.3V or 5V).

• GND: Ground.

• SCL: Clock signal for I2C.

• SDA: Data signal for I2C.

2. Wiring Example (Using Arduino):

• VCC → 3.3V or 5V on Arduino.

• GND → GND on Arduino.

• SCL → A5 (Arduino Uno) or GPIO22 (ESP32).

• SDA → A4 (Arduino Uno) or GPIO21 (ESP32).

3. Required Libraries: Install the Adafruit SSD1306 and Adafruit GFX libraries using the Arduino IDE Library Manager.