Construction Machinery Telescopic Arm , Lightweight Excavator Boom Arm Customized
|
|
Telescopic Excavator Arm for Construction Lightweight Telescopic Excavator Boom Popular Excavator Telescopic Arms Product Description-------Excavator Telescopic Boom What is an excavator telescopic arm? A telescopic boom on an excavator is designed to extend the machine’s operational range. This feature is particularly useful for tasks that demand greater reach or depth, allowing for more efficient excavation and material handling.
What are your advantages?
Advantages of telescopic arms:
1. The three-section telescopic boom is crafted from BS900E and Q355B materials, offering a lightweight yet durable option.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Some common size references
Three Section Telescopic Arm Configuration 1. A set of telescopic arm 2. Two high-pressure hoses 3. Two pins 4. One clamshell bucket 5. One two-way foot switch Some installation instructions for telescopic arms Our designs allow for interchangeable use of digging buckets and grab buckets. The first one is clamshell bucket ,usually use for Subway deep digging project . The second one is the grab bucket , compare to the clamshell bucket , the grab bucket have power
,can grab the stone. The last is the standard bucket , use for telescopic boom the bucket need do the special design . Product Detail Display -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Telescopic Boom Arm Engineering Case The telescopic arm of the excavator is suitable for the following working conditions:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- What is the purpose of beveling the long boom arm plate? Most welding machines commonly used in the industry have a penetration depth of only 3mm. Since the thickness of our long arm plate is at least 8mm, without beveling, the welder would not be able to fully penetrate through the entire joint. This would result in weak welds, leading to issues such as weld cracking in the future. We employ mechanical beveling, whereas other factories rely on manual beveling (as shown in the figure). -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- High precision machine of Zhonghe Machinery Manufacturers Large Floor-Standing Double-Sided Boring and Milling Lathe:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- About Zhonghe Machinery Company Profile: Kaiping Zhonghe Machinery Manufacturing Co., Ltd. Established in 2018, Kaiping Zhonghe Machinery Co., Ltd. focuses on producing customized excavator booms and attachments. Situated in the Cuishan Lake New District of Kaiping City, our steel structure workshop covers 21,000 m³. Our dedicated team includes more than 100 technicians and 50 welders with over 7 years of experience, alongside 30 senior designers. With a robust R&D team that boasts over 100 patents, we ensure quality control and cost efficiency in every product, manufacturing around 800 units each year. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- CE certification & Utility model patent certificates Our products have been exported to over 60 countries, utilizing various transportation methods such as sea, land, and air freight. For packaging, we use either wooden crates or stretch film to secure the products. Before shipment, the goods are carefully packaged and then loaded into containers to ensure their safety during transit.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Packaging & Shipping
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- FAQ(Some frequently asked questions): Q: Are you a manufacturer? A: We are a manufacturer/supplier of excavator arms and attachments. We have a super large factory. The factory area is several times that of our competitors. It is the largest excavator attachment factory in Guangdong Province. It has complete production equipment and its products have been exported to more than 60 countries around the world.
Q: Why does the telescopic arm have the difference between a shell bucket and a grab bucket? A: Generally, shell buckets are easy to use for silt and sand, and
can dig a large volume with higher efficiency. However, in general
sand and stone work, shell buckets have no digging force and are
limited by the opening, so the efficiency of shell buckets will be
reduced. Grab buckets are more suitable for this kind of work.
However, due to the overall weight of the grab bucket, the volume
of the grab bucket is generally smaller than that of the shell
bucket, but in work with more stones, the advantages of grab
buckets are more obvious. Q:Is it better to use a single cylinder or a double cylinder for
the shell bucket equipped with a telescopic arm? A:We always use the double cylinder design and never use the single
cylinder design. It has the advantages of low failure rate,
convenient maintenance, and less oil leakage. What are the
disadvantages of the double cylinder? The first is that the shell
bucket with a double cylinder is heavier, and the synchronization
of grabbing is worse. The overall weight of a single cylinder is
lower, and the synchronization is better, the grabbing efficiency
is higher, but the failure rate is higher. Q:What is the material of the telescopic arm? A: The arm tube is made of BS900E, and other parts are made of
Q3558, which is lighter and more durable. We use a thickness of
6mm.
Any information, pls contact Sophia! |
||||||||||||||||||||||||||||||||
| Product Tags: Customized Construction Machinery Boom Arm Lightweight Excavator Telescopic Arm Construction Machinery Excavator Boom Arm |
|
Top 1 30M Excavator Telescopic Arm with Clamshell Bucket Grab Bucket |
|
Top 1 Excavator Telescopic Arm Dipper Stick 28m Clamshell Bucket Grab |
|
Telescopic Dipper Clamshell Telescopic Arm For Cat 350 Sany 500 Hitachi 490 |
|
Excavator Telescopic Arm With Clamshell Bucket For Construction BS900E |
|
China 25ton-55ton Hitachi Excavator Telescopic Arm For Construction Work |
|
Telescopic Dipper Arm With 28m 30m 32m Digging Depth For Construction |