SQE 2-100Applicable to
1.Domestic groundwater intake
2.Boosting of domestic water supply
3.Groundwater intake
SQE 2-100
3 "multi-stage submersible pumps are used for domestic water
supply, liquid transportation in water tanks, irrigation, and
environmental applications. The pump is equipped with "floating"
impellers, each with its own tungsten carbide/ceramic bearings.
The pump is equipped with soft start and idle operation protection,
including push up, overvoltage, undervoltage, overload, and
overheating.
This motor is a permanent magnet rotor single-phase motor that
ensures optimal efficiency within various pressure ranges. The
motor is equipped with replaceable end caps and comes with sockets.
| |
Liquid
Transported liquid: water
Liquid temperature range: 0-35 ° C
Liquid temperature during operation: 20 ° C
Density: 998.2 kg/m³
Technology
The pump data is based on the pump speed on it: 10700 revolutions per minute
Rated flow: 2 m³/h
Rated head: 108 m
Approvals: CE,PCBC,RCM,EAC,CN Rohs
Exempt,Morocco,UKCA,SEPRO
Curve tolerance: ISO9906:2012 3B
Installation
Maximum operating pressure: 15 bar
Pump outlet: RP1 1/4
Minimum wellbore diameter: 76 mm
Electrical data
Motor model: MSE3
Input power - P1: 2.05 kW
Rated power - P2: 1.55 kW
Pump required power (P2): 1.35 kW
Power frequency: 50 Hz
Rated voltage: 1 x 200-240 V
Rated current: 11.2 amperes
Power factor: 1.00
Rated speed: 10700 revolutions per minute
Starting method: Directly start
Encapsulation level (IEC 34-5): IP68
Insulation Class (IEC 85): F
Cable length: 1.5 meters
Motor Number: 96160856
|
