OEM Wireless IP Mesh Module For HD Video Transmitting For UAV And
UGV
Introduction
The FD-6100 provides highly integrated MESH self-organizing network
data transmission, and it is featured with automatic networking,
automatic routing, automatic frequency modulation, automatic
healing, and anti-jamming. At the same time, its low power
consumption and mini size meet the variety application needs, such
as industry production, emergency communication, image
transmission, driverless and video surveillance.
Based on mature SOC chipset and TD-LTE wireless communication
standard, FD-6100 supports MESH Ad-Hoc network and does not rely on
the public network. It adopts OFDM and MIMO technologies to support
multiple bandwidths:3MHz/5MHz/10MHz/20MHz. Its flat system
architecture design can effectively reduce system delay, improve
system transmission capacity to achieve long transmission distance,
large data throughput and strong anti-interference ability.
Application
Drone/robot collaborative networking Stable/real-time/long-distance communication Supports Point to point/point to multi-point HD video transmission for NLOS/LOS
| | |
| GENERAL | | TECHNOLOGY | MESH base on TD-LTE Wireless technology standard | | ENCRYPTION | ZUC/SNOW3G/AES(128) OptionalLayer-2 | | DATA RATE | 30Mbps(Uplink and Downlink) | | RANGE | 10km(Air to ground)500m-3km(NLOS Ground to ground) | | CAPACITY | 16nodes | | POWER | 23dBm±2 (2w or 10w on request) | | LATENCY | One Hop Transmission≤30ms | | MODULATION | QPSK, 16QAM, 64QAM | | ANTI-JAM | Automatically Cross-Band frequency hopping | | BANDWIDTH | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz | | POWER CONSUMPTION | 5Watts | | POWER INPUT | DC12V |
| SENSITIVITY | | 2.4GHZ | 20MHZ | -99dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm | | 1.4GHZ | 20MHZ | -100dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm | | 800MHZ | 20MHZ | -100dBm | | 10MHZ | -103dBm | | 5MHZ | -104dBm | | 3MHZ | -106dBm |
| FREQUENCY BAND | | 2.4Ghz | 2401.5-2481.5 MHz | | 1.4Ghz | 1427.9-1447.9MHz | | 800Mhz | 806-826 MHz |
| COMUART | | Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level | | Control Data | TTL mode | | Baud rate | 115200bps | | Transmission Mode | Pass-through mode | | Priority level | Higher priority than the network portWhen the signal transmission
is
crowed, the control data will be transmitted in priority | Note:1. The data transmitting and receiving is broadcast in the
network.
After successful networking, each FD-6100 node can receive
serial data.
2. If you want to distinguish between sending,
receiving and control, you need todefine the format yourself |
| MECHANICAL | | Temperature | -40℃~+80℃ | | Weight | 50grams | | Dimension | 7.8*10.8*2cm | | Stability | MTBF≥10000hr |
| INTERFACES | | RF | 2 x SMA | | ETHERNET | 1xEthernet | | COMUART | 1x COMUART | | POWER | DC INPUT | | INDICATOR | Tri-COLOR LED |
Interface
|
