Model: GC-GREE-30 This series of plate vulcanizing machine is used to press molding
all kinds of rubber model products and non-model products of the
main equipment, can also be used to press all kinds of
thermosetting plastics and foaming rubber and plastic products. It
has independent power mechanism and electrical system, and adopts
centralized control by push button. The working pressure and
heating temperature can be adjusted within a certain range. This
model is divided into manual and semi-automatic two. Heating Plate Features Adopting imported high temperature resistant steel, the surface is
treated by deep carbonisation, hard chrome plating and other
processes, which has the characteristics of fast heat transfer,
fast cooling, corrosion resistance, high hardness, no deformation
and so on. Back built-in heater and thermostat, high power, fast
warming, sensitive temperature measurement, uniformity, small
temperature error range. Product Parameters | Model | GC-CREE-30 | | Pressure capacity | 30 Ton | | Pressure gauge | Dual node pressure adjustable, pressure adjustment accuracy of 10% | | Platen size (mm metric) | 250*250/300*300/350*350/400*400/450*450/500*500/600*600mm
(opertional) | | Hot platen material | High temperature resistant imported steel plate, surface carbide
quenching, special treatment of fast heat conduction, pressure
parallel non-deformation, wear-resistant. | | Platen hardness | 50~60HRC | | Platen Flatness | 0.03mm | | Platen Flatness | ≤0.03mm | | Platen flatness and parallelism | ≤0.16mm | | Temperature range | Normal temperature -250ºC [can be customized up to 500ºC]. | | Temperature uniformity | 2.5ºC [the larger the platen the higher the temperature the worse
the temperature uniformity] | | Temperature controller | Precision module with PLC touch screen control, display inside the
touch screen, numerical value display. | | Temperature control method | Temperature control motherboard precision control, self-tuning with
high-precision sensors, temperature display accuracy: ± 1.0 ºC. | | Timer | Setting display in touch panel, time range 0.1S~99min~9.9hr | | Heater | Heating mold built-in cylindrical [according to the platen area
configuration of different power packaging platen temperature
uniformity, not the same power] | | Rising time | Normal temperature~160ºC about 15mins | | Two hot plates | The hot plate can be set to control the temperature separately | | Heating method | electrical heating | | Cooling method | water cooling | | Hydraulic system | Adopt CREE.6 hydraulic flow closed-loop control system, oil pump
drive high-performance electro-hydraulic with high-precision
non-resistance cylinder piston execution rate control mode, with
pressure automatic compensation function. Once pressurized
automatically make up the pressure, load force is strong, lifting
and lowering smoothly; automatic pressurization, pressure
preservation, unpressurization. | | Cylinder Stroke | Max 150mm [customizable | | Cylinder speed | 11mm/s | | Pressure gauge | 0~200kg/sq.cm | | Mold opening method | Fully automatic rise and fall (with manual-automatic dual function) | | Safety device | Safety guards, safety doors. | | Number of safety devices | Four | | Main unit volume | (W×D×H)1200×750×1650 mm | | Power Voltage | 3∮,AC380V | | Weight | ≈680kg |
Detailed Photos |
