PC Preform Plastic Impact Testing Machine Melt Flow Rate
tester
A. Product description:
It is used to determine the MFR value of the melt flow rate through
the standard die every 10 minutes when various plastics and gums
pass through a certain temperature and load in a viscous flow
state. It is suitable for melting high temperature polycarbonate,
poly sulfoxide, fluorine plastics, nylon and other engineering
plastics. Also, it is appropriate for the poly formaldehyde,
polystyrene, polypropylene, ABS resin poly formaldehyde,
polycarbonate resin and other low-temperature plastic melting test.
The machine is widely use in plastic production, plastic
products, petrochemical and other industries and related
universities, scientific research units and commodity inspection
departments.
B. Test standards
GB-T3682-2018 Determination of melt flow rate and melt volume
flow rate for thermoplastics
ISO1133: 1997 Determination of melt mass flow rate MFR and
melt volume flow rate MVR for thermoplastics
ASTM D1238 Standard test method for determination of flow
rate of thermoplastics melt by extruded plastimeters
C. Parameters
Model | GC-MI-BPV |
Measurement | MFR+MVR |
Corrosion resistance | No |
Display mode | Kestroke control |
Cutting method | Hand automatic integration |
Temperature control range | 100ºC-450ºC |
Temperature control accuracy | ±0.5ºC |
Temperature uniformity | ±1ºC |
Thermal recovery time | <4min |
Time resolution | 0.1S |
Weight loading | Manual |
Report method | Printout |
Die | Carbon tungsten steel 2.095±0.005mm |
Power | AC220V±10% 50HZ |
Product Description
Detailed Photos
Packaging & Shipping
FAQ