KNOKOO Replacement 4 Layers Filter Set For FED350 Laser Fume Extractor Beauty Salon

Product Description:

1. Composition

This replacement filter set includes:

• 1 Main Filter

• 2 Medium Filters

• 10 Pre-filters

This comprehensive quadruple-stage filtration system offers greater dust capacity compared to single-layer filters. It effectively captures harmful gases and smoke, providing clean air and ensuring the overall efficiency of your fume extraction system.

2. Filtration Layers

• Pre-filter (First Layer)

  • Material: Thickened fiber material with laser-cutting and casting technology, smooth outer surface, high filtration precision.
  • Function: This layer effectively filters out large particles and prevents clogging, ensuring the air entering the next filtration stages is free from major debris.

• Medium Filter (Second Layer)

  • Material: High-quality 3M filter material with sealed filling technology.
  • Function: This layer captures fine dust and particles, reducing the load on the subsequent filters. It has a large dust-holding capacity, making it highly effective at prolonging the life of the high-efficiency filter.

• Medium Activated Carbon Filter (Third Layer)

  • Material: Activated carbon with advanced adsorption properties.
  • Function: This layer effectively absorbs odors and gases produced during work processes, especially for substances that earlier filters could not trap. It significantly reduces the amount of residual smells in the air.

• High-Efficiency Filter (Fourth Layer)

  • Material: High-iodine value activated carbon, designed for optimal adsorption.
  • Function: This final layer eliminates any remaining harmful gases and VOCs, preventing secondary pollution. It has a high efficiency in removing airborne toxins and odors, ensuring that the air is purified to the highest standards.

3. Compatibility

• This filter set is specially designed for the KNOKOO FED350 Fume Extractor. It provides a seamless replacement for old filters and ensures the system maintains optimal performance.

Product parameters:

Product use:

1. Replacement Cycle

The replacement cycle for each filter layer may vary based on the specific operating conditions and pollution levels. Below are the recommended timeframes:

• Pre-filter: Replace every 10-60 days, depending on dust accumulation and usage.
• Medium Filter: Replace every 3-6 months to ensure effective filtration.
• Medium Activated Carbon Filter: Replace every 3-6 months, based on environmental pollution and filter saturation.
• High-Efficiency Filter: Replace every 6-12 months, depending on the level of pollutants present in the air.

2. When to Replace:

• Pre-filter (First Layer): Replace when the filter becomes 70% covered with dust and oil, or if the airflow is reduced and cleaning is no longer effective.

• Medium Filter (Second Layer): Replace when dust accumulation reaches 70% and cleaning no longer restores its performance.

• Medium Activated Carbon Filter (Third Layer): Replace when it becomes saturated, and the ability to absorb odors diminishes or when dust buildup exceeds 70%.

• High-Efficiency Filter (Fourth Layer): Replace when dust and contaminants exceed 70% coverage or if odor adsorption becomes ineffective.

3. Maintenance and Cleaning

• Regular Cleaning: Clean pre-filters regularly by gently tapping or using a brush to remove accumulated dust and particles. For the other filters, inspect for visible damage or excessive clogging.

• Original Filters: To ensure optimal performance, it is important to use original, compatible filters. Using non-original filters can affect the machine’s filtration efficiency and damage the equipment.

• Check Regularly: Periodically inspect filters to ensure that they are performing as expected. This helps in determining the best time for replacement and keeps the extraction system running smoothly.

4. Applicable Fields:

The Filter Kit is designed for use in environments such as:

• Welding and soldering

• Laser printing and laser engraving

• Nail salons, beauty workspaces, and 3D printing

• DTF printing smoke, harmful gases, and unpleasant odors