This equipment can be a variety of types of small and medium-sized
pipe efficient three-dimensional cutting, hardware furniture
industry star products!
Advantages and characteristics
1:The front Chuck can be used for movable cutting, and the tail
material is ultra-short to about 35MM or "0" tail material design,
which can greatly improve the utilization rate of materials and
save materials.
2:With semi-automatic key strip feeding system, feeding is easier
and more efficient, and 5-12 strips can be fed at a time.
2: No drawing cutting pipe system: ordinary master can quickly
start, from the conventional pipe and hole type to draw the
traditional three-dimensional drawing of production
3: Bus control system: The whole series adopts bus control system,
multi-axis linkage, to achieve leapfrog, fly-cutting and other
processes, and the efficiency is improved by about 30% compared
with the traditional pulse system.
4: full travel chuck: automatic center, multi-material, multi-shape
pipe need not replace the fixture
5:that rear Chuck automatically blow air, the claws are not easy to
jam, and the pipe wall is clean.
6: Left / right model customization: more suitable for the location
of the workshop, convenient for the master to operate and save the
area, save people and more space.
7: cutting types: square pipe, round pipe, elliptical tube, channel
steel, Angle steel, I-steel and other arbitrary pipe.
| Model | B12 | B16 | B23 | B28 |
|
| | 1500-6000 | 1500-6000 | 1500-6000 | 1500-6000 |
| Laser power(W) |
|
Processing range | | | | |
| Round pipe: φ8mm-φ120mm | Round pipe:φ10mm-φ160mm | Round pipe:φ15mm-φ230mm | Round pipe:φ15mm-φ280mm |
| | | | |
| Rectangular tube: circumcircle ≤ φ120mm | Rectangular tube:circumcircle≤φ160mm | Rectangular tube:circumcircle≤φ230mm | Rectangular tube:circumcircle≤φ280mm |
| | | | |
| |
| The quality of pipes shall meet the requirements of GB/T17395-1998.
For special-shaped pipes, please consult the technical personnel of
our company. |
| | | | |
|
Weight of single pipe | | | | |
| Maximum load of both chucks together 100 kg | Maximum load of both chucks together 140 kg | Maximum load of both chucks together 300 kg | Maximum load of both chucks together 800 kg |
|
Repeatpositioning accuracy | ±0.02 | ±0.02 | ±0.05 | ±0.05 |
|
| (MM)Pipe length range | ≈6250 | ≈6250 | ≈6250 | ≈6251 |
|
| (MM) Machine size | L*W*H:8856*1365*2172 | L*W*H:8856*1365*2172 | L*W*H:8856*1365*2172 | L*W*H:8856*1365*2173 |
|
| Machine weight | ≈3.5 | ≈3.5 | ≈3.5 | ≈3.6 |
|
| Maximum acceleration (G) | ≈1.6 | ≈1.3 | ≈1.0 | ≈1.1 |
|
| (MM) Tailings length | ≈60 | ≈80 | ≈100 | ≈101 |
|
|
Explain | | |
| The standard laser power is 1500W, and other powers are
available.The chiller with 1500W laser is a horizontal model as
standard, which is placed in the main body, with less noise and
smaller footprint.Chillers of other powers are vertical and
external models, which are placed at any position outside the main
machine. | |
| Appearance | | |
| Standard: rack gray + sheet metal red, optional: rack blue + sheet
metal white (other colors can be specially made) . | |
| Important note | | |
| If the appearance and parameters of the equipment are changed
without further notice, only the terms of our technical plan and
order confirmation are binding, and the contract and the real
object shall prevail. | |
The standard laser power is 1500W, and other powers are
available.The chiller with 1500W laser is a horizontal model as
standard, which is placed in the main body, with less noise and
smaller footprint.Chillers of other powers are vertical and
external models, which are placed at any position outside the main
machine.
Standard: rack gray + sheet metal red, optional: rack blue + sheet
metal white (other colors can be specially made).
If the appearance and parameters of the equipment are changed
without further notice, only the terms of our technical plan and
order confirmation are binding, and the contract and the real
object shall prevail.
Feeding system (optional): the feeding frame is smooth and fast,
with automatic and semi-automatic feeding system is optional.
Sagging system (optional): solve the problem of residual residue
cutting on the inner wall of the pipe and save the secondary
vibration polishing process.
Punching function: can punch angle pipes or straight pipes,
convenient and fast.
Angle punching function: can punch 45°, 30°, 65° and other angles,
can be assembled into quadrilaterals, pentagons, triangles,
octagons, etc., the inner side of the angle can be selected with
edges or without edges.
Punching function: can punch 1-2 hole shapes at the same time,
round holes, square holes, large holes and small holes.
One-time forming, no need for repeated processing.
Can be completed with or without curling.
