Wellbore Cleaning Re543 RC Drill Bit Easy Control With High Accuracy
|
Detailed Product Description
|
We are capable to design and manufacture according to customer's
requirement on the Bit DiaNo., Air holes, carbide button shape and
the bit face shape. High air pressure and low air pressure. Thanks
to our long year experienced technicians and engineers in the
field, whom make this into reality and meet the clients' demand
accurately. All hammer and bits are compatible with many products manufactured by , Atlas Copco, etc, all our products are widely used in mining, tunneling, quarrying, construction, and civil engineering project. DTH drill bits 1. Customized acceptable 2. Bit diameter, face shape 3. Carbide button shape 4. qty of air hole Bit face shape options: 1. Drop Center Bit For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control. 2. Concave Face The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity. 3. Convex Face For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control. 4. Double Gauge Face This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit. 5. Flat Face Bit This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash. Carbide button shape selection: 1. Domed/Round Button Domed/Round Buttons are usually used as gauge buttons of DTH Bits, suitable for every abrasive and very hard formations. 2. Parabolic/Semi-Ballistic Buttons Parabolic Buttons are usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations. 3. Ballistic Button Ballistic Buttons are usually used as front buttons of DTH Bits, suitable for medium abrasive and mesium hard formations. They can also be used as gauge buttons if the rock is soft. 4. Sharp Button Sharp Buttons are usually used as front buttons of DTH Bits for soft formations where fast penetration rates are possible. 5. Flat Button Flat buttons are usually used as protection buttons to reduce wear on rubbing surfaces of DTH bits. |
| Product Tags: Wellbore Cleaning RC Drill Bit Easy Control RC Drill Bit Wellbore Cleaning Down Hole Hammer Bits |
Related Products
|
Alloy Steel Martello DTH High Air Pressure Rock Drilling Tool Compatible with RC Bits Re542 Re543 Re545 Re547 Re531 Re004 |
|
RC45 RC Rock Drilling Bit Reverse Circulation DTH Hammer Bit Anti Corrosion |
|
4.5 Inch Reverse Circulation Drill Bit Re543 DTH Drill Bits Heat Insulation |
|
Antirust RE545 DTH Hammer Drill Bits Reverse Circulation Drill Bit Weather Proof |
|
Reverse Circulation RC DTH Hammer Sturdiness Down Hole Hammer Bits Fissure Resistance |
|
Shank RE531 Reverse Circulation Bits Fire Retardant For Hazardous Waste Sites |
Email to this supplier