Integrated Ethernet Server HPE Proliant DL360 GEN10 10SFF DDR4

The HPE ProLiant DL360 Gen10 server delivers security, agility and flexibility without compromise. It supports the Intel® Xeon® Scalable processor with up to a 60% performance gain1 and 27% increase in cores2, along with 2933 MT/s HPE DDR4 SmartMemory supporting up to 3.0 TB2 with an increase in performance of up to 82%3.
 
With the added performance that Intel® Optane™ persistent memory 100 series for HPE6, HPE NVDIMMs7 and 10 NVMe bring, the HPE ProLiant DL360 Gen10 means business. Deploy, update, monitor and maintain with ease by automating essential server life cycle management tasks with HPE OneView and HPE Integrated Lights Out 5 (iLO 5). Deploy this 2P secure platform for diverse workloads in space constrained environments.
 

10 SFF NVMe/SAS backplane option device bay numbering

Notes: When the 10SFF NVMe/SAS backplane option is installed, bays 9 and 10 ONLY support NVMe Drives.The other bays support a mix of NVMe and SAS drives

8 SFF + 2 SFF device bay numbering Item Description
1 Bays 1-8 2 Bays 1 and 2
 

1. Drive support label

6. NIC status LED

2. Quick removal access panel

7. UID button/LED

3. Serial no. label pull tab

8. USB 3.0 port

4. Power On/Standby button and system power LED

9. iLO Service Port

5. Health LED

10. Max up to 10 NVMe drives (PCIe direct attached) or 8 SAS/SATA/NVMe + 2 NVMe

1. For 8 SFF or 4 LFF - Standard single rotor hot plug fans1 1 CPU – 5 standard fans 2 CPUs – 7 standard fans Option: High Performance fans
13. Primary (CPU1) PCIe 3.0 riser (Standard: GPU power connector + 1x 16 and 1x 8) Option: 2 SATA M.2 + 2x 16 Option: (8 SFF only): 2x 4 NVMe + 1x 16 and 1x 8
2. Option: HPE Smart Hybrid Capacitor or HPE Smart Storage Battery
14. Option: Front Display port / USB 2.0
3. Up to 2 processors (shown with standard heat sinks)
15. FlexibleLOM (supports various NICs up to 25GbE)
4. MicroSD card slot
16. x4 SATA port 1
5. Option: Chassis Intrusion Detection
17. x4 SATA port 2
6. Hard Drive backplane power connector
18. x2 SATA port 3
7. Dual internal USB 3.0 connector
19. x1 SATA port 4
8. Smart Array Controller (Type -a shown)
20. Front Power USB 3.0 connector
9. Up to 2 Power Supplies for redundant power
21. Optical/SATA port 5
10. Secondary (CPU2) PCIe 3.0 riser Option: Full Height x16 (Lose slot 2 on Primary riser)10
22. DDR4 DIMM slots (Fully populated 24 DIMMs shown)
11. System Battery
12. Optional: TPM 2.0

1. Slot 1 PCIe 3.0 Option: Rear Drive +1 SFF or 1 uFF SSD (2x M.2 cartridges)1
7. Embedded 4x 1GbE Adapter (if equipped)7
8. iLO Management Port
2. Slot 2 PCIe 3.0
9. Option: Serial Port
3. Option: Slot 3 PCIe 3.0 (Requires 2nd processor)
10. USB 3.0 Ports
4. Power Supply 2
11. Option: FlexibleLOM (Shown: 4x 1GbE)11
5. Power Supply 1
6. VGA port