Customized Constant Temperature and Humidity Chamber for
Electronics Testing
Product Description: The Battery Low - Pressure High - Altitude Simulation Test Chamber
is a highly versatile piece of equipment. It is designed to
simulate a wide range of environmental conditions for diverse
materials, electronic and electrical semi - finished products, as
well as finished products. This includes conducting environmental
simulation reliability tests such as high and low - temperature
constant - condition, gradual - change, sudden - change,
alternating - temperature, and wet - heat tests.
Furthermore, it can be seamlessly integrated with a charging and
discharging cabinet to carry out high and low - temperature
charging and discharging tests on experimental cells. This
combination allows for a more comprehensive evaluation of the
performance and reliability of batteries under different
environmental and operational conditions.
However, it is of utmost importance to adhere to strict safety
guidelines. The test chamber strictly prohibits the testing and
storage of flammable, explosive, corrosive, and volatile
substances. Additionally, strong electromagnetic emission sources
(except in cases of specific and pre - approved special
requirements) are not allowed within the chamber. These
restrictions are in place to ensure the safety of the equipment,
the test samples, and the operators, as well as to maintain the
integrity and accuracy of the test results.
Specification: 1. Temperature range | 0℃~150℃ | 2. Temperature resolution | 0.01℃ | 3. Temperature fluctuation | ≤±0.5℃ (after the temperature stabilizes, the temperature change at
any point in the test chamber within the specified time); | 4. Temperature uniformity | ≤2℃ (after the temperature stabilizes, the difference between the
highest temperature, the lowest temperature and the nominal
temperature at any time); | 5. Temperature deviation | ≤±2℃ | 6. Heating speed | 3℃/min (non-linear no-load, average temperature rise) | 7. Cooling speed | 1℃/min (non-linear no-load, average temperature drop) | 8. Humidity range | 20%RH ~98%RH | 9. Humidity fluctuation | ±2.5%RH | 10. Humidity uniformity | Humidity>75%RH:≤+2,-3%RH, Humidity<75%RH:≤±5%RH | 11. Humidity resolution | ±0.1%R.H | 12. Temperature and humidity comparison table | W600*D500*H750 mm (width*depth*height) Test space can be customized
according to customer needs) | 13. Inner box size | W930*D970*H1650 mm (width*depth*height) | 14. Outer box size | SUS#304 first-grade stainless steel | 15. Inner box material | Cold-rolled steel plate and treated with high-grade vertical paint,
beautiful and elegant | 16. Outer box material | Hard polyurethane foam | 17. Insulation material | R404A environmentally friendly refrigerant | 18. Refrigerant | Fully enclosed compressor | 19. Refrigeration system | Programmable touch screen control system | 20. Control system | About 400kg | 21. Net weight | 3∮, 220VAC±10%, 50Hz, three-phase five-wire system, reliable
grounding, 32A | 22. Power supply | 12kW | 23. Power | 0℃~150℃ |
Hot-Sale Products: Company Information: Dongguan Neide Technology Co. Ltd located in Dongguan,
Guangdong province with convenient transportation access. We take
immense pride in our journey of excellence as a premier provider of
top-quality testing equipment. With our unwavering commitment to
innovation, we specialize in crafting cutting-edge environmental
test chambers and mechanical test machines.
|
