Electric Chitherm Bf260-16 High Temp. Bell Furnace for Air
Atmosphere and Electric Fuel at High Temperature
1. Application: Widely used in the adhesive sintering process of zirconia ceramics,
magnetic materials, electronic ceramic components and other
products.
2. Technical Specification:- Rated Temp.:1500ºC
- Max Temp.:1600ºC
- Effective Dimensions:720mm*500mm*720mm(D*W*H)
- Heating Method:MoSi2 heating element
- Thermcouple:B-Type
- Temperature Control: 1 Point
- Temp. Set Accuracy: ±1ºC(flat temp. insulation)
- Temp. Control Mode:The Japanese Daiwa Chino Programmable Temperature Controller
features PID auto-tuning functionality.
- Temp. Uniformity: ± 5ºC (empty furnace insulation test
2hours under 1500ºC) .
- Maximum Heating Power:85kW
- Insulation Power:≤40kW
- Program Control: SCR Control Module;
- Lifting Mechanism: Lead Screw Drive Elevation System;
- Control Method: Phase Angle Control;
- Operating Atmosphere: Air;
- Exhaust System: Top-mounted exhaust stack for effluent discharge;
- Protection Functions: Audible & visual alarm system for
over-temperature, motor overload, and over-travel conditions;
- External Dimensions: 1950*3600*3100mm(D*W*H) (without control
cabinet)
- Appearance Color: Light gray.
3. Delivery List| Table 1 Delivery list |
| Item | Note | Qty. | | Basic Components | Furnace |
| 1 SET | | Inspection Certificates | Certificates of major outsourced components | 1 SET | | Technical Documents | Instructions, technical documents of the major outsourced parts,
etc | 1 SET | | Control Cabinet | 1000*2000*600mm(W*H*D) | 1 SET | | Key Components | Silicon molybdenum rod |
| 1 SET | | Thermocouple | B-Type | 1 SET | | Temperature controller | Japanese Daiwa Chino | 1 SET | | Spare Parts | Heating Element | Silicon molybdenum rod | 1 PC |
- Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no
corrosive gas, no strong airflow disturbance;
- Atmosphere Conditions: dry, clean, oil-free compressed air, working
pressure of 0.2- 0.4MPa, gas consumption of 10 - 30 m3/h;
- Ventilation System: non-contact access to the user pumping system,
pumping capacity is greater than 30 m3/h
- Ground Requirements: horizontal, no obvious vibration,
load-bearing> 500 Kg/m2;
- Power Condition(TBD): capacity > 120kVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire
line: yellow, green, red, Zero line: blue, Ground line:
yellow-green;
- Installation Site:4000mm*3500mm*4000mm(D*W*H), with an installation area greater than 14m2.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment
supplier specializing in the research and development, design,
manufacturing, sales, maintenance, and service of high-, medium-,
and low-temperature industrial furnaces and laboratory furnaces.
Its product range encompasses bell furnaces, box furnaces, hot air
furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie
hearth furnaces, rotary furnaces, roller hearth furnaces, and
pusher furnaces, which are extensively applied in fields such as
advanced ceramics, electronic components, thick-film circuits,
additive manufacturing, powder metallurgy, new energy, and
photovoltaics. These furnaces are suitable for thermal treatment
processes of materials including ITO targets, MLCC/HTCC/LTCC,
ceramic filters, magnetic materials, CIM/MIM, and lithium battery
cathodes and anodes, as well as various other new material
processes such as pre-sintering, dewaxing, degreasing, sintering,
drying, heat treatment, curing, and ceramization. |
