Vertical Industrial Electric Elevator Furnace Temperature for MIM

Vertical Industrial Electric Furnace Bf580-17 Type Temperature Bell Furnace for Industrial Applications.

The equipment is widely used in high-temperature sintering processes for advanced ceramics, magnetic materials, electronic ceramic components, and other products.

• Effective Size: 1200×600×800mm (D×H×W)
• Rated Temperature: 1700ºC
• Maximum Temperature: 1750ºC
• Number of Temperature Control Points: 2 points
• Furnace Temperature Uniformity: +5ºC within the effective space
• Temperature Control Accuracy: ±1ºC (during high-temperature platform stage)
• Control Method: Phase-Shift Control
• Heating Elements: Silicon molybdenum rods
• Control Instrument: Imported Intelligent Temperature Controller from Japan
• Alarm Protection: Audible and visual alarms for various conditions
• Thermocouple Type: B Index
• Atmosphere System: Air / Oxygen
• External Dimensions: 2880×3600×2240mm, excluding tracks and control cabinet
• Number of Gas Inlet Points: 20 points total (10 points on each side)
• Operating Power Supply: 220/380VAC 50Hz
• Maximum Power: 120kW
• Equipment Weight: Approximately 8000kg

• Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no corrosive gas, no strong airflow disturbance
• Atmosphere Conditions: dry, clean, oil-free compressed air, working pressure of 0.4-0.8MPa, gas consumption of 10-30 m3/h
• Ventilation System: Non-contact access user exhaust system, with an exhaust capacity greater than 50 m3/h
• Ground Requirements: horizontal, no obvious vibration, load-bearing> 1000 Kg/m2
• Power Condition: capacity > 160kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz
• Installation Site: 6000mm×4000mm×4000mm(D×W×H), with an installation area greater than 24m2