Electric Tempering Inert Gas Heat Treat Oven Furnace For Steel

3280*4600*2240mm W*H*D Electric Holding Furnace Chitherm Bf1500-15o 1500c High Temperature Bell Furnace

This equipment is primarily designed for electronic ceramic materials, magnetic materials, ceramic filters, and other applications requiring high temperature field uniformity or multi-species small batch production.

• Rated Temperature: 1400ºC
• Maximum Temperature: 1500ºC
• Effective Dimensions: 1600mm×1250mm×800mm (D×W×H)
• Heating Method: U-shaped silicon molybdenum heater
• Thermocouple: Type S
• Temperature Control: 6 Points
• Temperature Set Accuracy: ±1ºC (flat temperature insulation)
• Temperature Control Mode: Control module imported from Japan with PID
• Heat-up Rate: ≤2.5ºC/min
• Temperature Uniformity: ±5ºC (empty furnace insulation test 2 hours under 1400ºC)
• Program Tracking Accuracy: ±2ºC (>600ºC)
• Furnace Surface Temperature: ≤40ºC
• Maximum Lifting Trip: 800mm
• Lift System: Three-point control system with stable and reliable operation
• Loading Weight: ≤10000kg (with firing furniture and products)
• Atmosphere Control: Four channels of air inlet with glass rotor flowmeter control
• Exhaust System: 2 exhaust chimneys with auto switch function
• Alarm System: Over-temperature, broken couple, overload, over-range, deviation protection
• Maximum Heating Power: 180kW
• Insulation Power: ≤90kW
• External Dimensions: 3280×4600×2240mm (D×W×H) without control cabinet
• Appearance Color: Light gray

• Environmental Conditions: Temperature 0~40ºC, humidity ≤80%RH, no corrosive gas, no strong airflow disturbance
• Atmosphere Conditions: Dry, clean, oil-free compressed air, working pressure of 0.4-0.8MPa, gas consumption of 30-90 m³/h
• Ventilation System: Non-contact access to user pumping system with capacity >100 m³/h
• Ground Requirements: Horizontal, no obvious vibration, load-bearing >600 Kg/m²
• Power Condition: Capacity >240kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz
• Installation Site: 4000mm×4000mm×5000mm (D×W×H), with installation area >20m²