Intelligent Vehicle Positioning System 4G Vehicle Tracking Fleet Management GPS

Main function

1. Product Specifications

2. Product Features

3. Installation and Operation

1. Device Installation

(1) Inspect the Device

Check the device's appearance and ensure all accessories are included.

(2) Install SIM Card

Open the device's bottom cover and insert the SIM card into the slot. Avoid excessive force to prevent damage. Do not insert or remove the SIM card while the device is powered on. Ensure the SIM card has internet access.

(3) Terminal Installation Location Requirements

A. Waterproof: Choose a location that is not prone to water ingress to keep the terminal dry. Avoid air conditioning vents to prevent condensation inside the terminal, which can affect its lifespan.
B. Vibration Resistance: Do not install the terminal in areas with prolonged strong vibrations.
C. Interference Prevention: Keep the terminal away from in-car audio and communication devices to avoid conduction and radiation interference.

(4) Install Positioning Antenna

Ensure the positioning antenna's receiving surface faces upward and is not obstructed by metal objects. For optimal performance, the antenna's base should be as flat as possible, with a tilt angle not exceeding 45°.
Route the cables discreetly for both aesthetic reasons and to prevent accidental or intentional damage. Connect the positioning antenna to the terminal's "Positioning Antenna" port on the side and ensure it is tightly secured to avoid loosening due to vibrations, which could affect positioning accuracy.

(5) Install Communication Antenna

To prevent signal interference, avoid entangling the communication antenna with other control cables. To avoid interference with in-car wireless devices (e.g., radio), maintain a distance of at least 50 cm between the communication antenna and other devices.