DOB Light Source Detection Machine DOB Power Testing Equipment
HXT-ZDCS025 Lighting LED Testing Equipment For Dob Light Source
Testing Manufacturing Assembly Line
Description
Machine introduction:
This machine is used to test the LED light source board, with a
visual detection of the number of lamp bead lights,
detect the power of the DOB to set the upper and lower
power value judgment, can realize a test of 5,4..., dual
Y-axis without clearance
DOB light source testing equipment is a kind of equipment which is
specially used for testing the power of light source vision and
electrical parameters.
A DOB light tester may also be called a DOB light testing device.
Main functions: DOB light source detection machine is mainly used
for power detection of LED light source visual and electrical
parameters, to ensure that the quality and performance of light
source power and wattage meet standards.
Product Specification
| Device name | DOB light source tester (floor type) |
| Unit type | HXT-ZDCS025 (300 * 350 double Y-axis) |
| Equipment size | 96*102*147.7CM |
| Weight of equipment | 125kg |
| Equipment voltage | AC220V, 50Hz, with reliable grounding |
| How to work | The 7-inch man-machine interface and high-performance PLC |
| control |
| Scope of application | Test the monochrome and three-section variable light |
| dual-color DOB light source products. |
| Applicable product size | 260mm-350mm |
Product details
Equipment work requirements
1. Working environment temperature is 0~50℃.
2. Prevent strong vibration, prevent large amounts of dust and
corrosion gas intrusion
3. Keep away from the strong electromagnetic dry close
source when applied.
functional parameter
1. Can test the input end, AC power, up to seven test together.
2. The equipment can manually switch between AC and DC input power
supply selection, with optional AC frequency conversion power
supply and DC power supply, and the test voltage can be manually
adjusted.
3. Two operating stations can be tested in different stations
according to the actual production requirements.
4. Different test procedures can be set according to different PCB
boards, and the width of the PCB boards can be adjusted.
5. The machine test time can be set to meet different test time
requirements.
6. The program formula can be saved, and different PCB tests can be
replaced with the corresponding test procedures.
7. Around station can maximum 300mm * 350mm product test.
8. The cylinder stroke of the test fixture is 30mm. With
electronic components on the surface of the test product, the
height shall not exceed 22mm.
9. Equipment capacity: If 5 small panel products are tested
in a row, if a row is tested in 3 seconds, the hourly
capacity is 6000PCS h.
